Item Fits

+ New calculation

FITS

It fitswith 3 ft 3.5 in to spare

Will a bed (60x200x61 cm) fit in a room?

bed· 24 in × 6 ft 7 in × 24 in

+3 ft 3.5 in (+33%)of clearance at tightest point

Item being fitted

bed24 in × 6 ft 7 in × 24 in

Space clearance

Room9 ft 10 in × 9 ft 10 in × 8 ft

Result

3 ft 3.5 in of clearance

▸ depth axis · binding

See the full bed room guide →

Expert analysis

A bed measuring 24 in × 79 in × 24 in fits in a room, with about 3 ft 3.5 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Tightest clearance: 3 ft 3.5 in clear
Result: Every axis clears

+3 ft 3.5 in clearance

· ON THE DEPTH AXIS

It fits with clearance on every axis.

Your bed will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft 7 in vs 9 ft 10 in

Clearance +3 ft 3.5 in (+33.3%) on the DEPTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{1860}{13950}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 1000, 2400, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(39.4)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 3.279

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room width✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

78.7 + 12 = 90.7

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room width✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

118.1 - 12 = 106.1

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is)	100 cm	centered	✓
0° (as-is)	100 cm	wall_left	✓
0° (as-is)	100 cm	wall_right	✓
0° (as-is)	50 cm	floating	✓
90° rotated	50 cm	centered	✓
90° rotated	100 cm	wall_left	✓
90° rotated	100 cm	wall_right	✓
90° rotated	50 cm	floating	✓
45° diagonal	58 cm	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

3 ft Bed in a 11 ft roomFITS

3 ft bed in a 10 ft roomNEEDS MORE INFO

3 ft bed in a 10 ft roomFITS

3 ft bed in a 11 ft roomFITS

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a bed (60x200x61 cm) fit in a room?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check