Item Fits

+ New calculation

NEEDS MORE INFO

Will a bed (99x191x61 cm) fit in a room?

bed· 3 ft 3 in × 6 ft 3 in × 24 in

+3 ft 9 in (+48%)of clearance at tightest point

Item being fitted

bed3 ft 3 in × 6 ft 3 in × 24 in

Space clearance

Room10 ft × 12 ft × 8 ft

Result

3 ft 9 in of clearance

▸ depth axis · binding

See the full bed room guide →

Expert analysis

A bed measuring 39 in × 75 in × 24 in likely fits in a room, with about 3 ft 9 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Tightest clearance: 3 ft 9 in clear
Result: Review the recorded result

+5 ft 9 in clearance

· ON THE DEPTH AXIS

Here’s what we found.

Your bed will likely fit, but we could not confirm every dimension.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft 3 in vs 12 ft

Clearance +5 ft 9 in (+47.9%) on the DEPTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{2925}{17282}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 1143, 2667, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(45)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 3.748

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room width✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

75 + 12 = 87

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room width✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

120 - 12 = 108

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), short wall	41 in	centered	✓
0° (as-is), short wall	69 in	wall_left	✓
0° (as-is), short wall	69 in	wall_right	✓
0° (as-is), short wall	35 in	floating	✓
0° (as-is), long wall	45 in	centered	✓
0° (as-is), long wall	45 in	wall_left	✓
0° (as-is), long wall	45 in	wall_right	✓
0° (as-is), long wall	23 in	floating	✓
90° rotated, short wall	23 in	centered	✓
90° rotated, short wall	45 in	wall_left	✓
90° rotated, short wall	45 in	wall_right	✓
90° rotated, short wall	23 in	floating	✓
90° rotated, long wall	35 in	centered	✓
90° rotated, long wall	69 in	wall_left	✓
90° rotated, long wall	69 in	wall_right	✓
90° rotated, long wall	35 in	floating	✓
1° diagonal	40 in	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

3 ft bed in a 10 ft roomFITS

3 ft bed in a 11 ft roomFITS

3 ft bed in a 10 ft roomFITS

3 ft Full-sized Bed in a 9 ft roomFITS

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a bed (99x191x61 cm) fit in a room?

Expert analysis

Here’s what we found.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check