Enter the table dimensions and the real staircase measurements for a computed fit result.
Standard sizes are only a starting point; your actual table, the openings, and the maneuver space decide this fit.
Reference dimensions are orientation aids, not a verdict. Measure your table and every opening before moving or buying. Check your own measurements before you buy or move.
Reference example: IRC 2021 §R311.7 — minimum stair width and headroom
Verdicts compare the supported item orientations against the measurements shown above. See our methodology
“Wish I'd used this before trying to force a fridge up the stairs.” — Lesson learned
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
In our offline check, a small 4-person dining table (48 × 48 × 30 in) likely does not fit up a code-minimum staircase (36 in wide, 80 in headroom) fully assembled. Your own table and staircase decide it — enter both measurement sets for a computed answer.
01The small 4-person dining table, 48 × 48 × 30 inches, from the ItemFits furniture and appliance catalog. It is a reference size, not a claim about your table.
02Removing the legs usually turns this into a flat top that can be carried on edge; check the top and legs as separate pieces.
03More like this
Unlock stair simulation, AR visualization, and more.
Get a verdict in seconds — then test every angle until you’re sure.
Open the fit calculator