Item Fits

+ New calculation

FITS

It fitswith 2.5 in to spare

Will a dell latitude 5420 (25x18x13 cm) fit in a container?

Dell Latitude 5420· 10 in × 7 in × 5 in

+2.5 in (+37%)of clearance at tightest point

Item being fitted

Dell Latitude 542010 in × 7 in × 5 in

Space clearance

Container20 in × 12 in × 8 in

Result

2.5 in of clearance

▸ height axis · binding

See more dell latitude 5420 container calculations →

Expert analysis

A dell latitude 5420 measuring 10 in × 7 in × 5 in fits in a container, with about 2.5 in to spare at the tightest point. The binding dimension is height: in its best-fitting orientation, the height is what comes closest to the limit, and it still clears. The persisted calculation steps support the reported tightest-point margin. That margin already subtracts a <1 in handling allowance, so it reflects a realistic load rather than a paper-thin theoretical fit. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Binding axis: Height
Tightest clearance: 2.5 in clear
Result: Every axis clears

+2.5 in clearance

· ON THE HEIGHT AXIS

It fits with clearance on every axis.

Every axis clears the opening — height is the tightest.
A <1 in handling allowance is already subtracted.
No tilting or compression needed.

5 in vs 8 in

Clearance +2.5 in (+34.5%) on the HEIGHT axis

AVolume inequality✓ PASS

\sum V_{\text{item}} \;\le\; V_{\text{container}}

↓ SUBSTITUTE

350 \;\overset{?}{\le}\; 1719

Plain English: Packed together the item fills about 20% of the space's volume — plenty of room by volume.

BAxis inequality · width✓ PASS

d_{\text{item}} \;\le\; d_{\text{space}}

↓ SUBSTITUTE

10 \;\overset{?}{\le}\; 19.4\quad(\text{width})

↓ EVALUATE

10\,\text{in} \;\le\; 19.4\,\text{in} \;\Longrightarrow\; \Delta = +9.4\,\text{in}

Plain English: Along the width, the item is 10 in and the space allows 19.4 in — 9.4 in to spare.

CAxis inequality · depth✓ PASS

d_{\text{item}} \;\le\; d_{\text{space}}

↓ SUBSTITUTE

7 \;\overset{?}{\le}\; 11.6\quad(\text{depth})

↓ EVALUATE

7\,\text{in} \;\le\; 11.6\,\text{in} \;\Longrightarrow\; \Delta = +4.6\,\text{in}

Plain English: Along the depth, the item is 7 in and the space allows 11.6 in — 4.6 in to spare.

DAxis inequality · height✓ PASS

d_{\text{item}} \;\le\; d_{\text{space}}

↓ SUBSTITUTE

5 \;\overset{?}{\le}\; 7.6\quad(\text{height})

↓ EVALUATE

5\,\text{in} \;\le\; 7.6\,\text{in} \;\Longrightarrow\; \Delta = +2.6\,\text{in}

Plain English: Along the height, the item is 5 in and the space allows 7.6 in — 2.6 in to spare.

E3D space diagonal✓ PASS

\mathcal{D}_{3D} = \sqrt{L^2 + W^2 + H^2}

↓ SUBSTITUTE

\sqrt{10^2 + 7^2 + 5^2}

↓ EVALUATE

13.2\,\text{in} \;\le\; 23.9\,\text{in} \;\Longrightarrow\; \Delta = +10.7\,\text{in}

Plain English: Corner to corner the item reaches 13.2 in — keep that swing room in mind for the turn after.

Orientation	L	W	H	Result	Note
✓ chosen254×178×127mm (Upright)	—	9.5 in	2.5 in	✓
254×127×178mm (On its side)	—	9.5 in	0.5 in	✓
178×254×127mm (Rotated 90°)	—	12.5 in	2.5 in	✓
178×127×254mm (On its side)	—	12.5 in	-2.5 in	✕	Too wide
127×254×178mm (On its side)	—	14.5 in	0.5 in	✓
127×178×254mm (On its side)	—	14.5 in	-2.5 in	✕	Too wide

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the container-fit check works

A container is a fully 3D box — length, width, AND height must accept the item simultaneously; corner reachability is a soft second constraint.

Treat the container as a 3D box and generate the item’s 6 dimension permutations (3 axes × 2 flips).
For each permutation, apply the constraint: item ≤ container on length, width, and height simultaneously.
Check reachability — items longer than arm’s reach can’t be loaded all the way into the back corners.
Subtract 1.5 in handling clearance on each axis for the mover’s grip plus pivot room.
Verdict ladder (verdict-tiers.js, shared with door): FITS ≥ 2 in; FITS_TIGHT 0.5–2 in; FITS_VERY_TIGHT 0–0.5 in; DOESN'T_FIT below.

Interior dimensions use the published spec; door rails, ribs, and floor lashings can shave 1–2 in off the usable corners.

Similar calculations

10 in What Items in a 11 in containerDOESN'T FIT

10 in Width 16 1⁄2 Height 1⁄4 Length 73 Weight 57 Lb Oz in a 15 in containerFITS

10 in Generic Item in a 24 in containerFITS

10 in Box in a 19 in containerFITS TIGHT

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a dell latitude 5420 (25x18x13 cm) fit in a container?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check