Will a washer (69x81x99 cm) fit in a space?
Expert analysis
Your washer will fit, with a comfortable margin — enough to move through without scraping.
The slot is the tightest point.
These are based on typical dimensions, so measure your specific item and space to confirm.
It fits with clearance on every axis.
Your washer will fit, with a comfortable margin — enough to move through without scraping.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 27 in | ≤ | 32 in | +5 in | (+15.6%) | |
| DEPTH | not applicable | |||||
| HEIGHT | 3 ft 3 in | ≤ | 6 ft 8 in | +3 ft 5 in | (+51.3%) | |
How the door-passage check works
A door is a 2D opening — width and height matter; depth (path length through the doorway) doesn’t.
- Generate all 6 dimension permutations of the item (3 axes × 2 flips).
- For each permutation, apply the door constraint: item_width ≤ door_width AND item_height ≤ door_height.
- Subtract 1.5 in handling clearance from each axis to leave room for human movement.
- Pick the permutation with the largest minimum-axis margin — that’s the orientation a mover would choose.
- Verdict ladder (verdict-tiers.js): FITS if margin ≥ 2 in; FITS_TIGHT if 0.5–2 in; FITS_VERY_TIGHT if 0–0.5 in; DOESN'T_FIT below.
Tolerance ±¼ in (6 mm) is applied implicitly (band promotion to FITS_VERY_TIGHT) — see the note below the orientation matrix.
Dimensions
No dimension-specific assumptions surfaced for this check.
Space geometry
- Square corners and a flat floor
- No trim, fixtures, or hardware protruding into the opening
- Door swings fully open (90°+) and stays open during passage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.