Will a bed (99x191x36 cm) Fit in a Room?

+2 ft 7.5 in clearance

· ON THE DEPTH AXIS

Your bed will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft 3 in vs 8 ft 10 in

Clearance +2 ft 7.5 in (+29.4%) on the DEPTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{2925}{13392}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 1295, 1709, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(51)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 2.802

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

39 + 24 = 63

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

106.3 - 24 = 82.3

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), long wall	80 cm	centered	✓
0° (as-is), long wall	80 cm	wall_left	✓
0° (as-is), long wall	80 cm	wall_right	✓
0° (as-is), long wall	40 cm	floating	✓
0° (as-is), short wall	85 cm	centered	✓
0° (as-is), short wall	1.3 m	wall_left	✓
0° (as-is), short wall	1.3 m	wall_right	✓
0° (as-is), short wall	65 cm	floating	✓
90° rotated, long wall	65 cm	centered	✓
90° rotated, long wall	1.3 m	wall_left	✓
90° rotated, long wall	1.3 m	wall_right	✓
90° rotated, long wall	65 cm	floating	✓
90° rotated, short wall	40 cm	centered	✓
90° rotated, short wall	80 cm	wall_left	✓
90° rotated, short wall	80 cm	wall_right	✓
90° rotated, short wall	40 cm	floating	✓
1° diagonal	78 cm	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

Run your own fit check

Ask about a different item, door, or route. Free, no signup.