Item Fits

+ New calculation

VERY TIGHT

It fitswith 8 in to spare

Will a table (183x183x76 cm) fit in a room?

table· 6 ft × 6 ft × 30 in

+8 in (+18%)of clearance at tightest point

Item being fitted

table6 ft × 6 ft × 30 in

Space clearance

Room7 ft 4 in × 7 ft 4 in × 8 ft

Result

8 in of clearance

▸ width axis · binding

See more table room calculations →

Expert analysis

A table measuring 72 in × 72 in × 30 in is a very tight fit in a room, with about 8 in to spare at the tightest point. One caveat: 36" primary walkway minimum (ada-style guideline, not code).

How we verified this

Tightest clearance: 8 in clear
Result: Fits in its best orientation

+1 ft 4 in clearance

· ON THE WIDTH AXIS

It fits, with almost no clearance.

Your table will fit in the room, with a workable walkway around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft vs 7 ft 4 in

Clearance +1 ft 4 in (+18.2%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{5185}{7743}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(203, 203, 406, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(8)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 0.666

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✕ FAIL

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

72 + 24 = 96

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✕ FAIL

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

88 - 24 = 64

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is)	8 in	centered	✓
0° (as-is)	16 in	wall_left	✓
0° (as-is)	16 in	wall_right	✓
0° (as-is)	8 in	floating	✕
90° rotated	8 in	centered	✓
90° rotated	16 in	wall_left	✓
90° rotated	16 in	wall_right	✓
90° rotated	8 in	floating	✕

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Will a table (183x183x76 cm) fit in a room?

Expert analysis

It fits, with almost no clearance.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check