Item Fits

+ New calculation

FITS

It fitswith 9 ft 2 in to spare

Will a dining table (190x90x76 cm) fit in a room?

dining table· 6 ft 3 in × 35 in × 30 in

+9 ft 2 in (+49%)of clearance at tightest point

Item being fitted

dining table6 ft 3 in × 35 in × 30 in

Space clearance

Room12 ft 2 in × 20 ft 8 in × 8 ft

Result

9 ft 2 in of clearance

▸ width axis · binding

See the full dining table room guide →

Expert analysis

A dining table measuring 75 in × 35 in × 30 in fits in a room, with about 9 ft 2 in to spare at the tightest point. One caveat: checked as one rigid piece: not compressed, bent, or taken apart.

How we verified this

Tightest clearance: 9 ft 2 in clear
Result: Every axis clears

+5 ft 11 in clearance

· ON THE WIDTH AXIS

It fits with clearance on every axis.

Your dining table will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft 3 in vs 12 ft 2 in

Clearance +5 ft 11 in (+48.6%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{2651}{36131}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 110.2, 173.2, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(110.2)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 7.213

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

74.8 + 24 = 98.8

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

248 - 24 = 224

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), short wall	90 cm	centered	✓
0° (as-is), short wall	180 cm	wall_left	✓
0° (as-is), short wall	180 cm	wall_right	✓
0° (as-is), short wall	90 cm	floating	✓
0° (as-is), long wall	220 cm	centered	✓
0° (as-is), long wall	280 cm	wall_left	✓
0° (as-is), long wall	280 cm	wall_right	✓
0° (as-is), long wall	140 cm	floating	✓
90° rotated, short wall	140 cm	centered	✓
90° rotated, short wall	280 cm	wall_left	✓
90° rotated, short wall	280 cm	wall_right	✓
90° rotated, short wall	140 cm	floating	✓
90° rotated, long wall	180 cm	centered	✓
90° rotated, long wall	180 cm	wall_left	✓
90° rotated, long wall	180 cm	wall_right	✓
90° rotated, long wall	90 cm	floating	✓
1° diagonal	89 cm	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Will a dining table (190x90x76 cm) fit in a room?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check