DOESN'T FIT
It doesn't fitby 12 in too large

Will a canapé (145x100x90 cm) fit in a space?

canapé· 4 ft 9 in × 3 ft 3 in × 35 in
−12 in (−142%)too large at tightest point
Item being fitted
canapé4 ft 9 in × 3 ft 3 in × 35 in
Space clearance
Space24 in × 6 ft 6 in
Result
12 in too large
▸ width axis · binding

Expert analysis

A canapé measuring 57 in × 39 in × 35 in does not fit in a space, but it's about 12 in too large at the tightest point. The binding dimension is width: that is the axis where the canapé runs out of room. The persisted calculation steps support the reported tightest-point margin. One caveat: checked as one rigid piece: not compressed, bent, or taken apart.

How we verified this
Binding axis
Width
Tightest clearance
12 in over
Result
Width does not clear
−12 in over
· ON THE WIDTH AXIS

It exceeds the opening at the tightest point.

  • The width axis runs out of room.
  • A 1.5 in handling allowance is already subtracted.

Similar calculations

Run your own fit check

Ask about a different item, door, or route. Free, no signup.