Home / Vehicle & Cargo Fit

GMC Sierra 1500 Truck Bed Dimensions

Bed length, width between the wheel wells, and tailgate opening for the GMC Sierra 1500, in inches and centimeters.

Bed: about 69 in (175 cm) long, 51 in (130 cm) wide between the wheel wells, roughly 63 cu ft. Tailgate opening: 51 x 22 in (130 x 56 cm).

Trusted across thousands of fit checks · updated daily
400 questions answered
Try

Measurements

GMC Sierra 1500 truck bed dimensions.

LengthWidthHeightVolume
Bed (tailgate up)69"175 cm51"130 cm22"56 cm63 cu ft1784 L
Bed (tailgate down)69"175 cm51"130 cm22"56 cm63 cu ft1784 L
Tailgate opening–51"130 cm22"56 cm–

Figures are typical for the current generation and vary slightly by trim and model year. The tailgate opening is the limiting dimension for wide or tall items, so measure it before the volume.

What fits

What fits in the GMC Sierra 1500 bed?

Queen Mattress
Fits flat in any bed length with tailgate down
Fits
Full Sheet of Plywood
Lays flat in standard and long bed
Fits
Couch
Most couches fit upright or on their side
Fits
ATV
Fits in standard bed with ramps
Fits

Measure smart

What to measure.

Four numbers decide nearly every fit check. Get these right and the rest follows.

  1. 01The bed length from the bulkhead to the closed tailgate, then again with the tailgate down for long loads.
  2. 02The width between the wheel wells, which is tighter than the width measured at the bed rails.
  3. 03The tailgate opening width and height, the real limit for tall or boxed loads.
  4. 04Your item at its widest point, including handles, rails, and packaging.

Don't make these

Common mistakes.

Most “it didn't fit” stories trace back to one of these oversights.

  1. ⚠Measuring the width at the bed rails instead of between the wheel wells, where a sheet of plywood actually rests.
  2. ⚠Assuming the tailgate-up length when the load only fits with the tailgate down.
  3. ⚠Forgetting that a tonneau cover or bed cap cuts the usable height.
  4. ⚠Trusting the brochure bed length instead of your own cab and bed configuration.

Frequently asked

Questions we keep getting.

  • What are the GMC Sierra 1500 truck bed dimensions?

    The GMC Sierra 1500 bed is about 69 inches (175 cm) long and 51 inches (130 cm) wide between the wheel wells, roughly 63 cubic feet. Dropping the tailgate adds usable length for long loads.

    01
  • What are the GMC Sierra 1500 tailgate opening dimensions?

    The GMC Sierra 1500 tailgate opening is about 51 inches wide and 22 inches tall (130 x 56 cm). Width between the wheel wells is the usual limit for wide loads like a sheet of plywood.

    02
  • Will a 4x8 sheet of plywood fit in the GMC Sierra 1500 bed?

    A 4x8 sheet is 48 inches wide. With a bed about 51 inches between the wheel wells, it lays flat between the wells; lower the tailgate for the full 96 inch length.

    03
  • Does the GMC Sierra 1500 bed size change by configuration?

    Pickups offer multiple bed lengths, commonly 5.5, 6.5, and 8 feet, depending on the cab choice. The figures here reflect a common configuration; check your trim's bed length for an exact number.

    04

Go deeper

Check your item and compare vehicles.

GMC Sierra 1500 fit calculatorCheck a specific item against the bed in every orientation.Cargo dimensions: 17 vehicle typesCompare cargo space side by side across vehicle types.How to load a car or SUVSeat-fold order, diagonal loading, and why the opening — not the volume — limits the fit.Will it fit through the door?The cargo space is only half the move — check the doorway too.Will it fit in the elevator?Plan the rest of the path before you load.Moving & truck-size guidePick the right vehicle or truck for the whole load.Moving pod dimensionsCompare the cargo area to a moving pod for bigger hauls.Chevrolet Silverado 150063 cu ft with the rear seats folded.Ford F-15052.8 cu ft with the rear seats folded.RAM 150053.9 cu ft with the rear seats folded.

Will it fit in your GMC Sierra 1500? Check before you load.

Enter your item and space above, get an instant fit verdict.

Open the fit calculator