Last updated: March 2026
Will a Mattress Fit in a Storage Unit?
Enter the mattress dimensions and the available space to check clearances, orientation, and tight-fit risks.
Whether it fits depends on measurements most people get wrong.
Key Measurement
Item dimensions vs. usable in a storage unit dimensions
Standard Dimensions
Item: Varies by model; measure the actual item.
Space: Varies by space; measure the usable interior and opening.
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Related Resources
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
1 inch can be the difference between fitting and getting stuck.
“Checked my carry-on against 3 airlines before a trip. Saved me a gate-check fee.” — Frequent flyer
Measurements verified by the ItemFits engineering team · Our methodology
Check Your Exact Fit
Standard sizes say it works — but your measurements are what matter.
Get fit verdicts while you shop
Install the free ItemFits extension — it reads product dimensions on IKEA, Wayfair, Amazon and tells you if it fits before you buy.
Was this calculator helpful?
What to Measure
- 1Measure the mattress length, width, height, and any protruding hardware or packaging.
- 2Measure the usable in a storage unit dimensions at the narrowest point, not the nominal size.
- 3Check the opening, turn, or access path that the item must pass through before it reaches the final position.
- 4Leave practical clearance for hands, padding, door swing, walking paths, or packing material.
Common Mistakes to Avoid
- Using catalog dimensions without measuring the actual item, frame, handles, legs, or packaging.
- Checking only volume or floor area while ignoring the opening and turn required to place the item.
- Forgetting that padding, blankets, boxes, and dollies add thickness during a real move.
Frequently Asked Questions
What is the first measurement to check for a mattress?
Start with the largest rigid dimension, then check the narrowest opening or turning point. A large item can have enough final space but still fail at the route into that space.
Should I measure with packaging or padding included?
Yes. Add the package, moving blanket, mattress bag, appliance dolly, or protective padding when that is how the item will actually be moved.