180-degree turn with wedge-shaped steps, no landing
You might also like
Planning a move for a new job? Explore relocation tools at JobOwl.
We may earn a commission if you purchase through this link, at no extra cost to you.Quick answer
Large furniture may not fit; consider professional assessment. Half Winder have a minimum clearance of 26 inches. The 180° turn may limit large items.
| Dimension | Measurement |
|---|---|
| Width | 36" |
| Minimum Clearance (critical) | 26" |
| Headroom | 80" |
| Total Rise | 105" |
| Tread Depth | 10" |
| Riser Height | 7.5" |
| Number of Risers | 14 |
180° winder turn — no reorientation possible, so furniture must maintain its angle. Critical clearance at the turn: 26".
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Go deeper
Frequently asked
Standard half winder have a width of 36 inches, tread depth of 10 inches, and riser height of 7.5 inches. The total rise is 105 inches with 14 risers.
01It depends on the sofa dimensions. Half Winder with 26" clearance may accommodate smaller sofas (under 72" wide), but larger sectionals typically won't fit.
02The minimum clearance on half winder is 26 inches. This is the narrowest point furniture must pass through. For safe passage, furniture's smallest dimension should be at least 2-3 inches less than this clearance.
03Enter your item and space above, get an instant fit verdict.
Open the fit calculator