Will a double bed (137x191x91 cm) fit in a room?
Expert analysis
A double bed measuring 54 in × 75 in × 36 in fits in a room, with about 2 ft 1 in to spare at the tightest point.
It fits with clearance on every axis.
Your double bed will fit in the room, with comfortable walkway space around it.
Handling: Position the item in the room using the orientation that maximizes walkway clearance.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 4 ft 6 in | ≤ | 10 ft | +5 ft 6 in | (+55.0%) | |
| DEPTH | 6 ft 3 in | ≤ | 12 ft | +5 ft 9 in | (+47.9%) | |
| HEIGHT | 36 in | ≤ | 8 ft | +5 ft | (+62.5%) | |
How the room-fit check works
A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.
- Place the item footprint inside the room rectangle in the orientation it will be used.
- Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
- Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
- Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.
Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.
Dimensions
No dimension-specific assumptions surfaced for this check.
Space geometry
- Square corners and a flat floor
- Existing furniture footprints already factored out of the usable area
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.