Will a couch (102x244x89 cm) fit in a room?
Expert analysis
A couch measuring 40 in × 96 in × 35 in does not fit in a room, but it's about 1 in too large at the tightest point.
It exceeds the opening at the tightest point.
Your couch will not fit in the room — but only just — it is a hair over the limit at the tightest point.
Handling: What to try instead The item exceeds the space in every orientation — standard entry won't work.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 3 ft 4 in | ≤ | 8 ft 4 in | +5 ft | (+60.0%) | |
| DEPTH | 8 ft | > | 3 ft 6 in | −4 ft 6 in | (−128.5%) | |
| HEIGHT | 35 in | ≤ | 8 ft | +5 ft 1 in | (+63.6%) | |
| Orientation | Min walkway | Strategy | Result |
|---|---|---|---|
| 0° (as-is), long wall | 0" | — | ✕ |
| 0° (as-is), short wall | 1" | centered | ✕ |
| 0° (as-is), short wall | 2" | wall_left | ✕ |
| 0° (as-is), short wall | 2" | wall_right | ✕ |
| 0° (as-is), short wall | 1" | floating | ✕ |
| 90° rotated, long wall | 2" | centered | ✕ |
| 90° rotated, long wall | 2" | wall_left | ✕ |
| 90° rotated, long wall | 2" | wall_right | ✕ |
| 90° rotated, long wall | 1" | floating | ✕ |
| 90° rotated, short wall | 0" | — | ✕ |
| 1° diagonal | 0.2" | centered | ✕ |
How the room-fit check works
A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.
- Place the item footprint inside the room rectangle in the orientation it will be used.
- Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
- Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
- Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.
Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.
Dimensions
- STANDARDCeiling height8ft (2440mm)
Space geometry
- Square corners and a flat floor
- Existing furniture footprints already factored out of the usable area
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.