Item Fits

+ New calculation

DOESN'T FIT

It doesn't fitwith 0 in to spare

Will a dining table (343x252x76 cm) fit in a room?

dining table· 11 ft 3 in × 8 ft 3 in × 30 in

+0 in (+0%)of clearance at tightest point

Item being fitted

dining table11 ft 3 in × 8 ft 3 in × 30 in

Space clearance

Room11 ft 3 in × 8 ft 3 in × 8 ft

Result

0 in of clearance

▸ width axis · binding

See the full dining table room guide →

Expert analysis

A dining table measuring 135 in × 99 in × 30 in does not fit in a room, with about 0 in to spare at the tightest point. One caveat: checked as one rigid piece: not compressed, bent, or taken apart.

How we verified this

Tightest clearance: 0 in clear
Result: A recorded check does not clear

+0 in clearance

· ON THE WIDTH AXIS

It exceeds the opening at the tightest point.

Your dining table will not fit in the room — but only just — it is a hair over the limit at the tightest point.

Handling: The item exceeds the space in every orientation — standard entry won't work.

11 ft 3 in vs 11 ft 3 in

Clearance +0 in (+0.0%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{13367}{13367}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✕ FAIL

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 0, 0, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✕ FAIL

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(0)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✕ FAIL

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 0

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✕ FAIL

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

99 + 24 = 123

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✕ FAIL

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

99 - 24 = 75

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Strategy	Result
0° (as-is), long wall	centered	✕
0° (as-is), long wall	wall_left	✕
0° (as-is), long wall	wall_right	✕
0° (as-is), long wall	floating	✕
0° (as-is), short wall	—	✕
90° rotated, long wall	—	✕
90° rotated, short wall	centered	✕
90° rotated, short wall	wall_left	✕
90° rotated, short wall	wall_right	✕
90° rotated, short wall	floating	✕
diagonal (1°–89°)	—	✕

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Will a dining table (343x252x76 cm) fit in a room?

Expert analysis

It exceeds the opening at the tightest point.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check