FITS TIGHT
It fitswith 1.5 in to spare

Will a freezer (91x74x178 cm) fit in a space?

freezer· 3 ft × 29 in × 5 ft 10 in
+1.5 in (−12%)of clearance at tightest point
Item being fitted
freezer3 ft × 29 in × 5 ft 10 in
Space clearance
Space32 in × 6 ft 8 in
Result
1.5 in of clearance
▸ width axis · binding

Expert analysis

A freezer measuring 36 in × 29 in × 70 in is a tight fit in a space, with about 1.5 in to spare at the tightest point. The binding dimension is width: in its best-fitting orientation, the width is what comes closest to the limit, and it still clears. The persisted calculation steps support the reported tightest-point margin. That margin already subtracts a 1.5 in handling allowance, so it reflects a realistic load rather than a paper-thin theoretical fit. One caveat: checked as one rigid piece: not compressed, bent, or taken apart.

How we verified this
Binding axis
Width
Tightest clearance
1.5 in clear
Result
Every axis clears
+1.5 in clearance
· ON THE WIDTH AXIS

It fits — but only just.

  • Every axis clears the opening — width is the tightest.
  • A 1.5 in handling allowance is already subtracted.
  • No tilting or compression needed.

Similar calculations

Run your own fit check

Ask about a different item, door, or route. Free, no signup.