Item Fits

+ New calculation

FITS

It fitswith 2 ft 7.5 in to spare

Will a queen (152x203x36 cm) fit in a room?

queen· 5 ft × 6 ft 8 in × 14 in

+2 ft 7.5 in (+46%)of clearance at tightest point

Item being fitted

queen5 ft × 6 ft 8 in × 14 in

Space clearance

Room9 ft 4 in × 11 ft 4 in × 8 ft

Result

2 ft 7.5 in of clearance

▸ width axis · binding

See more queen room calculations →

Expert analysis

A queen measuring 60 in × 80 in × 14 in fits in a room, with about 2 ft 7.5 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Tightest clearance: 2 ft 7.5 in clear
Result: Every axis clears

+4 ft 3.5 in clearance

· ON THE WIDTH AXIS

It fits with clearance on every axis.

Your queen will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

5 ft vs 9 ft 4 in

Clearance +4 ft 3.5 in (+46.2%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{4800}{15134}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 803, 1920, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(31.6)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 2.633

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room width✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

80 + 12 = 92

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room width✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

111.6 - 12 = 99.6

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), short wall	26 in	centered	✓
0° (as-is), short wall	4 ft 4 in	wall_left	✓
0° (as-is), short wall	4 ft 4 in	wall_right	✓
0° (as-is), short wall	26 in	floating	✓
0° (as-is), long wall	32 in	centered	✓
0° (as-is), long wall	32 in	wall_left	✓
0° (as-is), long wall	32 in	wall_right	✓
0° (as-is), long wall	16 in	floating	✓
90° rotated, short wall	16 in	centered	✓
90° rotated, short wall	32 in	wall_left	✓
90° rotated, short wall	32 in	wall_right	✓
90° rotated, short wall	16 in	floating	✓
90° rotated, long wall	28 in	centered	✓
90° rotated, long wall	4 ft 4 in	wall_left	✓
90° rotated, long wall	4 ft 4 in	wall_right	✓
90° rotated, long wall	26 in	floating	✓
1° diagonal	25 in	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

5 ft queen bed in a 10 ft roomFITS

5 ft queen bed in a 11 ft roomFITS

5 ft queen bed in a 15 ft roomFITS

5 ft queen bed in a 9 ft roomFITS

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a queen (152x203x36 cm) fit in a room?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check