Item Fits

+ New calculation

FITS

It fitswith 2 ft 7.5 in to spare

Will a small double bed (137x191x61 cm) fit in a room?

small double bed· 4 ft 6 in × 6 ft 3 in × 24 in

+2 ft 7.5 in (+12%)of clearance at tightest point

Item being fitted

small double bed4 ft 6 in × 6 ft 3 in × 24 in

Space clearance

Room10 ft × 7 ft 1 in × 8 ft

Result

2 ft 7.5 in of clearance

▸ depth axis · binding

See more small double bed room calculations →

Expert analysis

A small double bed measuring 54 in × 75 in × 24 in fits in a room, with about 2 ft 7.5 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Tightest clearance: 2 ft 7.5 in clear
Result: Every axis clears

+10.5 in clearance

· ON THE DEPTH AXIS

It fits with clearance on every axis.

Your small double bed will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft 3 in vs 7 ft 1 in

Clearance +10.5 in (+12.1%) on the DEPTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{4050}{10238}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 795, 1143, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(31.3)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 1.874

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

75 + 24 = 99

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

120 - 24 = 96

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
0° (as-is), long wall	10 in	centered	✕
0° (as-is), long wall	10 in	wall_left	✕
0° (as-is), long wall	10 in	wall_right	✕
0° (as-is), long wall	5 in	floating	✕
0° (as-is), short wall	16 in	centered	✓
0° (as-is), short wall	31 in	wall_left	✓
0° (as-is), short wall	31 in	wall_right	✓
0° (as-is), short wall	16 in	floating	✓
90° rotated, long wall	23 in	centered	✓
90° rotated, long wall	31 in	wall_left	✓
90° rotated, long wall	31 in	wall_right	✓
90° rotated, long wall	16 in	floating	✓
90° rotated, short wall	5 in	centered	✕
90° rotated, short wall	10 in	wall_left	✓
90° rotated, short wall	10 in	wall_right	✓
90° rotated, short wall	5 in	floating	✕
1° diagonal	9 in	centered	✕

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

4 ft full bed in a 8 ft roomFITS

4 ft full size bed in a 11 ft roomFITS

4 ft double bed in a 8 ft roomFITS

4 ft double bed in a 16 ft roomFITS

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a small double bed (137x191x61 cm) fit in a room?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check