Will a dresser (76x91x76 cm) Fit in a Room?

+2 ft 1 in clearance

· ON THE DEPTH AXIS

Your dresser will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

36 in vs 5 ft 1 in

Clearance +2 ft 1 in (+41.2%) on the DEPTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{1080}{8370}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 792, 2561, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(31.2)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 2.597

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room width✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

30 + 12 = 42

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room width✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

61.2 - 12 = 49.2

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), long wall	25 in	centered	✓
0° (as-is), long wall	25 in	wall_left	✓
0° (as-is), long wall	25 in	wall_right	✓
0° (as-is), long wall	13 in	floating	✓
0° (as-is), short wall	16 in	centered	✓
0° (as-is), short wall	31 in	wall_left	✓
0° (as-is), short wall	31 in	wall_right	✓
0° (as-is), short wall	16 in	floating	✓
90° rotated, long wall	31 in	centered	✓
90° rotated, long wall	31 in	wall_left	✓
90° rotated, long wall	31 in	wall_right	✓
90° rotated, long wall	16 in	floating	✓
90° rotated, short wall	13 in	centered	✓
90° rotated, short wall	25 in	wall_left	✓
90° rotated, short wall	25 in	wall_right	✓
90° rotated, short wall	13 in	floating	✓
1° diagonal	25 in	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

Run your own fit check

Ask about a different item, door, or route. Free, no signup.