Will a laundry floor backseat (48x41x33 cm) fit in a container?
Expert analysis
A laundry floor backseat measuring 19 in × 16 in × 13 in does not fit in a container, with about 0.5 in to spare at the tightest point. The binding dimension is height: that is the axis where the laundry floor backseat runs out of room. We checked every orientation, and none places the laundry floor backseat fully inside. One caveat: assuming 0.1" wall thickness (typical cardboard).
- Binding axis
- Length
- Tightest clearance
- <1 in over
- Orientations checked
- 6
- Result
- Length exceeds the opening
It exceeds the opening at the tightest point.
- The height axis runs out of room.
- Checked all 6 orientations — none fits.
- A <1 in handling allowance is already subtracted.
| Orientation | L | W | H | Result | Note |
|---|---|---|---|---|---|
| 483×406×330mm (Upright) | 0.23 ft | -0.04 ft | 0.05 ft | ✕ | Length |
| 483×330×406mm (On its side) | 0.23 ft | 0.21 ft | -0.2 ft | ✕ | Length |
| 406×483×330mm (Rotated 90°) | 0.49 ft | -0.29 ft | 0.05 ft | ✕ | Length |
| 406×330×483mm (On its side) | 0.49 ft | 0.21 ft | -0.46 ft | ✕ | Length |
| 330×483×406mm (On its side) | 0.73 ft | -0.29 ft | -0.2 ft | ✕ | Length |
| 330×406×483mm (On its side) | 0.73 ft | -0.04 ft | -0.46 ft | ✕ | Length |
How the container-fit check works
A container is a fully 3D box — length, width, AND height must accept the item simultaneously; corner reachability is a soft second constraint.
- Treat the container as a 3D box and generate the item’s 6 dimension permutations (3 axes × 2 flips).
- For each permutation, apply the constraint: item ≤ container on length, width, and height simultaneously.
- Check reachability — items longer than arm’s reach can’t be loaded all the way into the back corners.
- Subtract 1.5 in handling clearance on each axis for the mover’s grip plus pivot room.
- Verdict ladder (verdict-tiers.js, shared with door): FITS ≥ 2 in; FITS_TIGHT 0.5–2 in; FITS_VERY_TIGHT 0–0.5 in; DOESN'T_FIT below.
Interior dimensions use the published spec; door rails, ribs, and floor lashings can shave 1–2 in off the usable corners.
Dimensions
- MEASUREDDimensions are for the item itself, not including packaging or protective wrapping
- MEASUREDUsing standard laundry basket (22×16×14") dimensions
- MEASUREDUsing Window Air Conditioner dimensions for "laundry floor backseat"
- MEASUREDAssuming 3mm wall thickness (typical cardboard)
Space geometry
- Container floor is flat and rectangular
- No internal partitions or dunnage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.