Item Fits

+ New calculation

FITS

It fitswith 1 ft 9 in to spare

Will a bathtub (70x48x170 cm) fit in a container?

Bathtub· 28 in × 19 in × 5 ft 7 in

+1 ft 9 in (+24%)of clearance at tightest point

Item being fitted

Bathtub28 in × 19 in × 5 ft 7 in

Space clearance

Container5 ft 9 in × 5 ft 2 in × 7 ft 4 in

Result

1 ft 9 in of clearance

▸ height axis · binding

See more bathtub container calculations →

Expert analysis

A bathtub measuring 28 in × 19 in × 67 in fits in a container, with about 1 ft 9 in to spare at the tightest point. The binding dimension is height: in its best-fitting orientation, the height is what comes closest to the limit, and it still clears. The persisted calculation steps support the reported tightest-point margin. That margin already subtracts a <1 in handling allowance, so it reflects a realistic load rather than a paper-thin theoretical fit. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Binding axis: Height
Tightest clearance: 1 ft 9 in clear
Result: Every axis clears

+1 ft 9 in clearance

· ON THE HEIGHT AXIS

It fits with clearance on every axis.

Every axis clears the opening — height is the tightest.
A <1 in handling allowance is already subtracted.
No tilting or compression needed.

5 ft 7 in vs 7 ft 4 in

Clearance +1 ft 9 in (+23.9%) on the HEIGHT axis

AVolume inequality✓ PASS

\sum V_{\text{item}} \;\le\; V_{\text{container}}

↓ SUBSTITUTE

34857 \;\overset{?}{\le}\; 369596

Plain English: Packed together the item fills about 9% of the space's volume — plenty of room by volume.

BAxis inequality · width✓ PASS

d_{\text{item}} \;\le\; d_{\text{space}}

↓ SUBSTITUTE

27.6 \;\overset{?}{\le}\; 68.5\quad(\text{width})

↓ EVALUATE

27.6\,\text{in} \;\le\; 68.5\,\text{in} \;\Longrightarrow\; \Delta = {+40.9}\,\text{in}

Plain English: Along the width, the item is 27.6 in and the space allows 68.5 in — 40.9 in to spare.

CAxis inequality · depth✓ PASS

d_{\text{item}} \;\le\; d_{\text{space}}

↓ SUBSTITUTE

18.9 \;\overset{?}{\le}\; 61.4\quad(\text{depth})

↓ EVALUATE

18.9\,\text{in} \;\le\; 61.4\,\text{in} \;\Longrightarrow\; \Delta = {+42.5}\,\text{in}

Plain English: Along the depth, the item is 18.9 in and the space allows 61.4 in — 42.5 in to spare.

DAxis inequality · height✓ PASS

d_{\text{item}} \;\le\; d_{\text{space}}

↓ SUBSTITUTE

66.9 \;\overset{?}{\le}\; 88\quad(\text{height})

↓ EVALUATE

66.9\,\text{in} \;\le\; 88\,\text{in} \;\Longrightarrow\; \Delta = {+21}\,\text{in}

Plain English: Along the height, the item is 66.9 in and the space allows 88 in — 21 in to spare.

E3D space diagonal✓ PASS

\mathcal{D}_{3D} = \sqrt{L^2 + W^2 + H^2}

↓ SUBSTITUTE

\sqrt{27.6^2 + 18.9^2 + 66.9^2}

↓ EVALUATE

74.8\,\text{in} \;\le\; 127.2\,\text{in} \;\Longrightarrow\; \Delta = {+52.4}\,\text{in}

Plain English: Corner to corner the item reaches 74.8 in — keep that swing room in mind for the turn after.

Orientation	L	W	H	Result	Note
✓ chosen700×480×1700mm (Upright)	—	41 in	21 in	✓
700×1700×480mm (On its side)	—	41 in	69 in	✕	Too wide
480×700×1700mm (Rotated 90°)	—	49.5 in	21 in	✓
480×1700×700mm (On its side)	—	49.5 in	60.5 in	✕	Too wide
1700×700×480mm (On its side)	—	1.5 in	69 in	✓
1700×480×700mm (On its side)	—	1.5 in	60.5 in	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the container-fit check works

A container is a fully 3D box — length, width, AND height must accept the item simultaneously; corner reachability is a soft second constraint.

Treat the container as a 3D box and generate the item’s 6 dimension permutations (3 axes × 2 flips).
For each permutation, apply the constraint: item ≤ container on length, width, and height simultaneously.
Check reachability — items longer than arm’s reach can’t be loaded all the way into the back corners.
Subtract 1.5 in handling clearance on each axis for the mover’s grip plus pivot room.
Verdict ladder (verdict-tiers.js, shared with door): FITS ≥ 2 in; FITS_TIGHT 0.5–2 in; FITS_VERY_TIGHT 0–0.5 in; DOESN'T_FIT below.

Interior dimensions use the published spec; door rails, ribs, and floor lashings can shave 1–2 in off the usable corners.

Similar calculations

18 in 75 Ft Bookcase in a 4 ft containerDOESN'T FIT

20 in large suitcase in a 3 ft containerFITS

24 in Alienware Aurora Gaming Desktop ACT1250 in a 27 in containerDOESN'T FIT

3 ft chair in a 5 ft containerDOESN'T FIT

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a bathtub (70x48x170 cm) fit in a container?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check