Will a table top (91x183x46 cm) fit in an elevator?
Expert analysis
A table top measuring 36 in × 72 in × 18 in fits in an elevator, with about 1 ft 5 in to spare at the tightest point. The binding dimension is width: in its best-fitting orientation, the width is what comes closest to the limit, and it still clears. The persisted calculation steps support the reported tightest-point margin. One caveat: checked as one rigid piece: not compressed, bent, or taken apart.
- Binding axis
- Width
- Tightest clearance
- 1 ft 5 in clear
- Result
- Every axis clears
It fits with clearance on every axis.
- Every axis clears the opening — width is the tightest.
- No tilting or compression needed.
| Orientation | Door | Depth | Cab | Rot | Result |
|---|---|---|---|---|---|
| 914.4×1828.8×457.2mm 183 cm×46 cm | 15 cm | 139 cm | 19 cm | ✗ | ✕ |
| 914.4×1828.8×457.2mm 91 cm×46 cm | 42 cm | 47 cm | 19 cm | ✗ | ✕ |
| 914.4×1828.8×457.2mm 91 cm×183 cm | ✗ 2 cm | 184 cm | 19 cm | ✗ | ✕ |
| 914.4×457.2×1828.8mm 46 cm×183 cm | 16 cm | 139 cm | 37 cm | — | ✓ |
| 914.4×457.2×1828.8mm 91 cm×183 cm | ✗ 2 cm | 184 cm | 37 cm | ✗ | ✕ |
| 914.4×457.2×1828.8mm 91 cm×46 cm | 42 cm | 47 cm | 37 cm | ✗ | ✕ |
| 1828.8×914.4×457.2mm 91 cm×46 cm | 42 cm | 47 cm | 19 cm | 8 cm | ✓ |
| 1828.8×914.4×457.2mm 183 cm×46 cm | 15 cm | 139 cm | 19 cm | ✗ | ✕ |
| 1828.8×914.4×457.2mm 183 cm×91 cm | ✗ 2 cm | 184 cm | 19 cm | ✗ | ✕ |
| 1828.8×457.2×914.4mm 46 cm×91 cm | 43 cm | 47 cm | 47 cm | — | ✓ |
| 1828.8×457.2×914.4mm 183 cm×91 cm | ✗ 2 cm | 184 cm | 47 cm | ✗ | ✕ |
| 1828.8×457.2×914.4mm 183 cm×46 cm | 15 cm | 139 cm | 47 cm | ✗ | ✕ |
| 457.2×914.4×1828.8mm 91 cm×183 cm | ✗ 2 cm | 184 cm | 19 cm | ✗ | ✕ |
| 457.2×914.4×1828.8mm 46 cm×183 cm | 16 cm | 139 cm | 19 cm | 8 cm | ✓ |
| 457.2×914.4×1828.8mm 46 cm×91 cm | 43 cm | 47 cm | 19 cm | ✗ | ✕ |
| 457.2×1828.8×914.4mm 183 cm×91 cm | ✗ 2 cm | 184 cm | 47 cm | ✗ | ✕ |
| 457.2×1828.8×914.4mm 46 cm×91 cm | 43 cm | 47 cm | 47 cm | — | ✓ |
| 457.2×1828.8×914.4mm 46 cm×183 cm | 16 cm | 139 cm | 47 cm | ✗ | ✕ |
Margins shown are calculated; allow ±¼ in for tape-measure precision.
How the elevator-cab check works
An elevator gate is a 2D opening (cab door) followed by a 3D box (cab interior); items must enter the door AND fit inside the cab.
- Generate the 6 item permutations and test each against the elevator door opening (width × height).
- For permutations that enter, test against the cab footprint (depth × width) once inside.
- If the item is longer than the cab depth, check whether it fits rotated diagonally across the cab.
- Subtract 1.5 in handling clearance on each axis for movers loading and pivoting the item.
- Verdict ladder (verdict-tiers.js, shared with door): FITS ≥ 2 in; FITS_TIGHT 0.5–2 in; FITS_VERY_TIGHT 0–0.5 in; DOESN'T_FIT below.
Cab dimensions come from the building’s posted load plate; rotation diagonally fits longer items than the cab depth alone.
Dimensions
- item widthEstimated
- item depthEstimated
- item heightEstimated
- space width
- space depth
- space height
Space geometry
- Door opens fully to the cab interior width
- No protruding handrails or guards inside the cab
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.