Item Fits

+ New calculation

FITS

It fitswith 4 ft 8 in to spare

Will a platform bed (224x166x15 cm) fit in a room?

platform bed· 7 ft 4 in × 5 ft 6 in × 6 in

+4 ft 8 in (+39%)of clearance at tightest point

Item being fitted

platform bed7 ft 4 in × 5 ft 6 in × 6 in

Space clearance

Room12 ft × 13 ft 6 in × 8 ft

Result

4 ft 8 in of clearance

▸ width axis · binding

See more platform bed room calculations →

Expert analysis

A platform bed measuring 88 in × 66 in × 6 in fits in a room, with about 4 ft 8 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Tightest clearance: 4 ft 8 in clear
Result: Every axis clears

+4 ft 8 in clearance

· ON THE WIDTH AXIS

It fits with clearance on every axis.

Your platform bed will fit in the room, with comfortable walkway space around it.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

7 ft 4 in vs 12 ft

Clearance +4 ft 8 in (+38.9%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{5765}{23332}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 1423, 2451, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(56)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 4.018

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

65.5 + 24 = 89.5

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

162 - 24 = 138

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), short wall	28 in	centered	✓
0° (as-is), short wall	56 in	wall_left	✓
0° (as-is), short wall	56 in	wall_right	✓
0° (as-is), short wall	28 in	floating	✓
0° (as-is), long wall	37 in	centered	✓
0° (as-is), long wall	74 in	wall_left	✓
0° (as-is), long wall	74 in	wall_right	✓
0° (as-is), long wall	37 in	floating	✓
90° rotated, short wall	39 in	centered	✓
90° rotated, short wall	74 in	wall_left	✓
90° rotated, short wall	74 in	wall_right	✓
90° rotated, short wall	37 in	floating	✓
90° rotated, long wall	48 in	centered	✓
90° rotated, long wall	56 in	wall_left	✓
90° rotated, long wall	56 in	wall_right	✓
90° rotated, long wall	28 in	floating	✓
1° diagonal	27 in	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

6 ft super king bed in a 37 ft roomFITS

6 ft king bed in a 12 in roomDOESN'T FIT

6 ft king size bed in a 12 ft roomFITS

6 ft king bed in a 15 ft roomFITS

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a platform bed (224x166x15 cm) fit in a room?

Expert analysis

It fits with clearance on every axis.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check