Will a king bed (193x203x36 cm) fit in a room?
Expert analysis
A king bed measuring 76 in × 80 in × 14 in fits in a room, with about 5 ft 9.5 in to spare at the tightest point.
It fits with clearance on every axis.
Your king bed will fit in the room, with comfortable walkway space around it.
Handling: Position the item in the room using the orientation that maximizes walkway clearance.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 6 ft 4 in | ≤ | 12 ft 6 in | +6 ft 1.5 in | (+49.2%) | |
| DEPTH | 6 ft 8 in | ≤ | 13 ft 9 in | +7 ft 1.5 in | (+51.6%) | |
| HEIGHT | 14 in | ≤ | 8 ft | +6 ft 10 in | (+85.4%) | |
| Orientation | Min walkway | Strategy | Result |
|---|---|---|---|
| ✓ chosen0° (as-is), short wall | 93 cm | centered | ✓ |
| 0° (as-is), short wall | 1.9 m | wall_left | ✓ |
| 0° (as-is), short wall | 1.9 m | wall_right | ✓ |
| 0° (as-is), short wall | 93 cm | floating | ✓ |
| 0° (as-is), long wall | 1.1 m | centered | ✓ |
| 0° (as-is), long wall | 1.8 m | wall_left | ✓ |
| 0° (as-is), long wall | 1.8 m | wall_right | ✓ |
| 0° (as-is), long wall | 88 cm | floating | ✓ |
| 90° rotated, short wall | 88 cm | centered | ✓ |
| 90° rotated, short wall | 1.8 m | wall_left | ✓ |
| 90° rotated, short wall | 1.8 m | wall_right | ✓ |
| 90° rotated, short wall | 88 cm | floating | ✓ |
| 90° rotated, long wall | 1.1 m | centered | ✓ |
| 90° rotated, long wall | 1.9 m | wall_left | ✓ |
| 90° rotated, long wall | 1.9 m | wall_right | ✓ |
| 90° rotated, long wall | 93 cm | floating | ✓ |
| 1° diagonal | 92 cm | centered | ✓ |
Margins shown are calculated; allow ±¼ in for tape-measure precision.
How the room-fit check works
A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.
- Place the item footprint inside the room rectangle in the orientation it will be used.
- Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
- Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
- Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.
Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.
Dimensions
- MEASUREDSpace is emptyno existing furniture or items blocking the path
- MEASUREDCeiling height assumed 8ftnot measured
- MEASUREDAssumed m for space dimensions
- MEASUREDDetected bed, sizeking
- MEASUREDEstimated width, depth, height for king bed from local_db
- MEASURED36" primary walkway minimum (ADA-style guideline, not code)
Space geometry
- Square corners and a flat floor
- Existing furniture footprints already factored out of the usable area
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.