What is the biggest risk with a queen mattress and Ford Explorer?

Third-row-folded length and liftgate height decide whether a queen rides flat or angled.

What are the Ford Explorer cargo dimensions?

Ford Explorer measured space: about 38 x 47 x 32 in behind the rear seats, about 81 in of load length with them folded, through an opening of about 45 x 30 in. Those are the figures this page checks against. The opening is what decides most queen mattress loads — an item can sit well under the total volume and still fail at the lip.

Should I include packaging when measuring a queen mattress?

Yes. If the queen mattress will be moved boxed, wrapped, bagged, or padded, measure the boxed or protected size. A few extra inches can turn a fits result into a tight or no-fit result.

ItemFits

About Blog FAQ Features Pricing Work with us

Home / Vehicle & Cargo Fit

Will a queen mattress fit in a Ford Explorer?

Enter the queen mattress dimensions and the usable Ford Explorer measurements to check the tightest opening, interior clearance, and loading angle.

Trusted across thousands of fit checks · updated daily

400 questions answered

Room Preview·Visual Results·Simulations

Three possible answers

Real verdicts, with the math behind them.

Every exact check returns one of three outcomes — with the dimensions, the path constraint that mattered, and the maneuver that changes the answer.

Fits

queen mattress · rolled foam

A rolled foam queen mattress can usually load through the hatch or trunk pass-through because the roll diameter is the limiting dimension, not the full mattress length. On the Ford Explorer that means clearing a load floor about 38 x 47 in and 32 in tall.

Tight fit

queen mattress · angled inside Ford Explorer

A flexible mattress may work if it can bend slightly and ride diagonally. The check depends on cargo length, opening height, wheel-well width, and whether seats fold flat. The Ford Explorer opens up to roughly 81 in of length once the rear seats are folded.

Does not fit

queen mattress · rigid innerspring

A rigid mattress usually fails when its full length or width exceeds the usable cargo floor or pass-through. If it cannot fold or roll, plan on a van, pickup, roof rack, or delivery. The Ford Explorer is rated at 47.9 cu ft — volume a rigid item can never use if it does not clear the opening first.

Measure smart

What to measure.

Four numbers decide nearly every fit check. Get these right and the rest follows.

01Measure the queen mattress length, width, height, thickness, packaging, and any rigid parts that cannot bend.
02Measure the usable Ford Explorer opening and interior space at the narrowest point, not the advertised volume or nominal size.
03Third-row-folded length and liftgate height decide whether a queen rides flat or angled.
04Ford Explorer measured space: about 38 x 47 x 32 in behind the rear seats, about 81 in of load length with them folded, through an opening of about 45 x 30 in.
05Account for blankets, straps, handles, seats, trim, hinges, wheel wells, or door frames that reduce usable clearance.

Don't make these

Common mistakes.

Most “it didn't fit” stories trace back to one of these oversights.

⚠Comparing only volume or cubic feet while ignoring the opening the queen mattress actually has to pass through.
⚠Using the advertised queen mattress size instead of the widest measured point — arms, feet, handles, hinges, and packaging all count.
⚠Measuring the Ford Explorer at its widest point instead of its narrowest; trim, hinges, wheel wells, and seat hardware all steal clearance.
⚠Assuming a queen mattress can ride diagonally or tilted without checking height and turn space at the same time.

Frequently asked

Questions we keep getting.

Will a queen mattress fit in a Ford Explorer?
It depends on the measured queen mattress, the usable Ford Explorer opening, and whether the item can tilt, compress, fold, roll, or ride diagonally. Use the checker on this page with your exact dimensions before moving or buying.
01
What is the biggest risk with a queen mattress and Ford Explorer?
Third-row-folded length and liftgate height decide whether a queen rides flat or angled.
02
What are the Ford Explorer cargo dimensions?
Ford Explorer measured space: about 38 x 47 x 32 in behind the rear seats, about 81 in of load length with them folded, through an opening of about 45 x 30 in. Those are the figures this page checks against. The opening is what decides most queen mattress loads — an item can sit well under the total volume and still fail at the lip.
03
Should I include packaging when measuring a queen mattress?
Yes. If the queen mattress will be moved boxed, wrapped, bagged, or padded, measure the boxed or protected size. A few extra inches can turn a fits result into a tight or no-fit result.
04

Related fit checks.

What Fits in a Mercedes Sprinter Van?A Sprinter 144 wheelbase holds about 319 cubic feet. See how many boxes, appliances, or furniture pieces fit, then check your exact load.What Fits in a Ford Transit Cargo Van?A Ford Transit 130 low roof holds about 247 cubic feet with a 126 inch floor. See how many boxes and furniture pieces fit, then check your load.What Fits in a Ram ProMaster?A Ram ProMaster 1500 low roof holds about 308 cubic feet with a 124 inch floor and a wide, flat cargo box. See how many items fit, then check your load.What Fits in a U-Haul Cargo Van?A U-Haul cargo van has about 246 cubic feet of loading space, roughly 114 by 67 by 56 inches. See how many boxes or furniture pieces fit, then check your load.What Fits in a Ford Ranger Truck Bed?A Ford Ranger 5 foot bed is about 60 inches long at the floor and 48 inches between the wheel wells. See what fits with the tailgate up or down, then check your load.What Fits in a Honda Ridgeline Bed?A Honda Ridgeline bed is about 64 inches long and a wide 50 inches between the wheel wells, so a 4x8 sheet lies flat. See what fits, then check your load.What Fits in a Jeep Gladiator Bed?A Jeep Gladiator 5 foot bed is about 60 inches long, or 81 inches with the tailgate down, and 45 inches between the wheel wells. See what fits, then check your load.What Fits in a Toyota Tacoma Bed?A Toyota Tacoma bed is about 60 inches (5 ft) or 73 inches (6 ft) long and 45 inches between the wheel wells. See what fits in each, then check your load.

Will a Queen Mattress Fit in a Chevrolet Suburban?Check whether a queen mattress (60 x 80 in) fits in a Chevrolet Suburban with the rear rows folded, including liftgate height and cargo width, before you load.Will a queen mattress fit in a Hyundai Santa Fe?A queen typically needs folding or rolling. Check your exact queen mattress measurements before you buy or move it.Will a queen mattress fit in a Subaru Outback?Queen mattresses usually require foam rolling or folding. Check your exact queen mattress measurements before you buy or move it.Will a mattress fit in a Nissan Altima?The sedan trunk opening and rear-seat pass-through limit mattress size more than the trunk volume does.Will a mattress fit in a Nissan Kicks?Subcompact cargo-floor width and liftgate height usually require a rolled or twin mattress. Check your exact mattress measurements before you buy or move it.Will a queen mattress fit in a Toyota RAV4?Seats-folded cargo length and wheel-well width are the blockers. Check your exact queen mattress measurements before you buy or move it.Will a mattress fit in a Toyota Sienna?A twin or full mattress has a realistic flat loading path with the rear rows cleared. Check your exact mattress measurements before you buy or move it.

All vehicle fit checks →

Unlock stair simulation, AR visualization, and more.

Will it fit? Know before you buy.

Get a verdict in seconds — then test every angle until you’re sure.

Open the fit calculator