Last updated: March 2026
Enter your armoire dimensions and staircase measurements to plan the move — height clearance, weight, and landing turns.
Whether it fits depends on measurements most people get wrong.
Armoire height vs. landing depth and ceiling clearance
Item: Standard armoire: 36–48" W × 20–26" D × 72–84" H (150–400 lbs)
Space: Standard residential staircase: 36" wide, 80" ceiling clearance
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
1 inch can be the difference between fitting and getting stuck.
“Wish I'd used this before trying to force a fridge up the stairs.” — Lesson learned
Measurements verified by the ItemFits engineering team · Based on IRC R311.7, IBC Chapter 10 · Our methodology
Standard sizes say it works — but your measurements are what matter.
Install the free ItemFits extension — it reads product dimensions on IKEA, Wayfair, Amazon and tells you if it fits before you buy.
Moving a 200-pound dresser or appliance upstairs without injury requires the right technique and equipment. Here's how professionals do it safely.
Most people measure stair width and call it done. The landing, ceiling height, and turning angle are where furniture actually gets stuck.
Many armoires are designed as a stackable two-piece unit — a top hutch sitting on a bottom dresser base. Look for bolts or clips at the joint line. Separating the two halves makes stair navigation dramatically easier.
Plan for at least 3 people for a solid wood armoire (200+ lbs). Use furniture straps to distribute weight evenly. Position one person at the top, one at the bottom, and one to guide at the landing turn.
If the armoire height exceeds the landing depth, you may need to tilt it diagonally, using both the floor depth and ceiling height. For very tall armoires (over 84"), separating into two pieces is usually the only option for a 90-degree landing turn.