Last updated: March 2026
Enter your hallway corner dimensions and furniture measurements — the app calculates whether you can make the turn.
Whether it fits depends on measurements most people get wrong.
Furniture length and depth vs. corridor widths at the turn
Item: Varies — measure your specific item's length, width, and height
Space: Standard hallway corner: 42–48" wide per corridor. Building code minimum: 36" per corridor
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
1 inch can be the difference between fitting and getting stuck.
“Saved me from a $200 return — the couch was 2 inches too wide for the doorway.” — Online shopper
Measurements verified by the ItemFits engineering team · Based on IRC R311.6, ADA 403, ANSI A117.1 · Our methodology
Standard sizes say it works — but your measurements are what matter.
A 36-inch hallway doesn't mean 36 inches of turning space. At corners, the geometry shrinks dramatically. Here's how turning radius actually works.
L-shaped hallways force a 90° turn with no extra room. Here are the techniques that professional movers use to navigate tight corners.
Apartment hallways range from 36 to 48 inches. Building era, type, and local codes determine your hallway width — and what furniture fits through it.
The turning radius depends on the furniture's length and depth, plus the width of both corridors. As a rough rule: for a 90° turn, you need corridor widths whose sum is at least the furniture's length (when the item is tilted diagonally through the corner). Our calculator runs the exact geometry for your specific dimensions.
For two 42-inch-wide corridors meeting at a 90° angle, the maximum flat-carry length is roughly 84–90 inches (7–7.5 feet). Tilting the item vertically can increase this significantly by reducing the floor-level footprint. Narrower corridors reduce the maximum length proportionally.
Yes — long, thin items (like bookshelves and bed frames) need less turning space per unit of length than deep items (like dressers and desks). A 72-inch bookshelf that is 12 inches deep is much easier to pivot than a 72-inch dresser that is 24 inches deep.
Often yes. Removing table legs, bed rails, or sectional connectors splits the item into smaller pieces. Measure each piece individually — the largest remaining piece determines whether you can make the turn. Most modern furniture is designed for disassembly.
Options include: tilting the item vertically, disassembling into smaller pieces, removing hallway obstructions (shoe racks, radiator covers, door trim), or finding an alternate route through a different room or exterior entry point. Worst case, check if a window or balcony offers a viable path.