Will a triple wammy pokemon tin (9x6x11 cm) fit in a space?
Expert analysis
Your triple wammy pokemon tin will not clear the space — and it is clearly over the limit at the tightest point. The reverse-fit is the limiting constraint.
Double-check your measurements first — if they hold, trying a different angle or a larger route are your quickest fixes.
Here’s what we found.
Your triple wammy pokemon tin will not clear the space — and it is clearly over the limit at the tightest point. The reverse-fit is the limiting constraint.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 4 in | ≤ | 4 ft | +3 ft 8.5 in | (+92.7%) | |
| DEPTH | 2 in | ≤ | 16 in | +1 ft 1.5 in | (+85.9%) | |
| HEIGHT | 5 in | ≤ | 24 in | +1 ft 7.5 in | (+81.3%) | |
How the door-passage check works
A door is a 2D opening — width and height matter; depth (path length through the doorway) doesn’t.
- Generate all 6 dimension permutations of the item (3 axes × 2 flips).
- For each permutation, apply the door constraint: item_width ≤ door_width AND item_height ≤ door_height.
- Subtract 1.5 in handling clearance from each axis to leave room for human movement.
- Pick the permutation with the largest minimum-axis margin — that’s the orientation a mover would choose.
- Verdict ladder (verdict-tiers.js): FITS if margin ≥ 2 in; FITS_TIGHT if 0.5–2 in; FITS_VERY_TIGHT if 0–0.5 in; DOESN'T_FIT below.
Tolerance ±¼ in (6 mm) is applied implicitly (band promotion to FITS_VERY_TIGHT) — see the note below the orientation matrix.
Dimensions
- item widthEstimated
- item depthEstimated
- item heightEstimated
- space widthEstimated
- space depthEstimated
- space heightEstimated
Space geometry
- Square corners and a flat floor
- No trim, fixtures, or hardware protruding into the opening
- Door swings fully open (90°+) and stays open during passage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Run your own fit check
Ask about a different item, door, or route. Free, no signup.