Item Fits

+ New calculation

NEEDS MORE INFO

Will a king sleigh bed (193x203x61 cm) fit in a room?

king sleigh bed· 6 ft 4 in × 6 ft 8 in × 24 in

+3 ft 4 in (+37%)of clearance at tightest point

Item being fitted

king sleigh bed6 ft 4 in × 6 ft 8 in × 24 in

Space clearance

Room10 ft × 12 ft × 8 ft

Result

3 ft 4 in of clearance

▸ width axis · binding

See more king sleigh bed room calculations →

Expert analysis

A king sleigh bed measuring 76 in × 80 in × 24 in likely fits in a room, with about 3 ft 4 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.

How we verified this

Tightest clearance: 3 ft 4 in clear
Result: Review the recorded result

+3 ft 8 in clearance

· ON THE WIDTH AXIS

Here’s what we found.

Your king sleigh bed will likely fit, but we could not confirm every dimension.

Handling: Position the item in the room using the orientation that maximizes walkway clearance.

6 ft 4 in vs 10 ft

Clearance +3 ft 8 in (+36.7%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{6080}{17282}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✓ PASS

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 1016, 1728, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✓ PASS

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(40)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✓ PASS

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 2.832

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✓ PASS

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

76 + 24 = 100

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✓ PASS

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

144 - 24 = 120

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Min walkway	Strategy	Result
✓ chosen0° (as-is), short wall	22 in	centered	✓
0° (as-is), short wall	44 in	wall_left	✓
0° (as-is), short wall	44 in	wall_right	✓
0° (as-is), short wall	22 in	floating	✓
0° (as-is), long wall	34 in	centered	✓
0° (as-is), long wall	40 in	wall_left	✓
0° (as-is), long wall	40 in	wall_right	✓
0° (as-is), long wall	20 in	floating	✓
90° rotated, short wall	20 in	centered	✓
90° rotated, short wall	40 in	wall_left	✓
90° rotated, short wall	40 in	wall_right	✓
90° rotated, short wall	20 in	floating	✓
90° rotated, long wall	32 in	centered	✓
90° rotated, long wall	44 in	wall_left	✓
90° rotated, long wall	44 in	wall_right	✓
90° rotated, long wall	22 in	floating	✓
1° diagonal	21 in	centered	✓

Margins shown are calculated; allow ±¼ in for tape-measure precision.

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

6 ft king sized bed in a 11 ft roomFITS

6 ft King Sized Bed in a 10 ft roomFITS

6 ft bed in a 8 ft roomFITS

6 ft king bed in a 10 ft roomFITS

Run your own fit check

Ask about a different item, door, or route. Free, no signup.

Will a king sleigh bed (193x203x61 cm) fit in a room?

Expert analysis

Here’s what we found.

Dimensions

Space geometry

Handling

Similar calculations

Run your own fit check