Will a king (389x300x61 cm) fit in a room?
Expert analysis
A king measuring 153 in × 118 in × 24 in does not fit in a room, with about 0 in to spare at the tightest point. One caveat: item is rigid and cannot be compressed, bent, or disassembled.
- Tightest clearance
- 0 in clear
- Result
- A recorded check does not clear
It exceeds the opening at the tightest point.
Your king will not fit in the room — but only just — it is a hair over the limit at the tightest point.
Handling: The item exceeds the space in every orientation — standard entry won't work.
| Orientation | Min walkway | Strategy | Result |
|---|---|---|---|
| 0° (as-is), long wall | 0 in | centered | ✕ |
| 0° (as-is), long wall | 0 in | wall_left | ✕ |
| 0° (as-is), long wall | 0 in | wall_right | ✕ |
| 0° (as-is), long wall | 0 in | floating | ✕ |
| 0° (as-is), short wall | 0 in | — | ✕ |
| 90° rotated, long wall | 0 in | — | ✕ |
| 90° rotated, short wall | 0 in | centered | ✕ |
| 90° rotated, short wall | 0 in | wall_left | ✕ |
| 90° rotated, short wall | 0 in | wall_right | ✕ |
| 90° rotated, short wall | 0 in | floating | ✕ |
| diagonal (1°–89°) | 0 in | — | ✕ |
How the room-fit check works
A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.
- Place the item footprint inside the room rectangle in the orientation it will be used.
- Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
- Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
- Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.
Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.
Dimensions
- item widthStandard size
- item depthStandard size
- item heightStandard size
- space width
- space depth
- space heightEstimated
Space geometry
- Square corners and a flat floor
- Existing furniture footprints already factored out of the usable area
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.