Will a king size bed frame (193x203x61 cm) fit in a container?
Expert analysis
A king size bed frame measuring 76 in × 80 in × 24 in does not fit in a container, but it's about 5 ft 4 in too large at the tightest point. The binding dimension is depth: that is the axis where the king size bed frame runs out of room. The persisted calculation steps support the reported tightest-point margin. One caveat: checked as one rigid piece: not compressed, bent, or taken apart.
- Binding axis
- Depth
- Tightest clearance
- 5 ft 4 in over
- Result
- Depth does not clear
It exceeds the opening at the tightest point.
- The depth axis runs out of room.
- A <1 in handling allowance is already subtracted.
How the container-fit check works
A container is a fully 3D box — length, width, AND height must accept the item simultaneously; corner reachability is a soft second constraint.
- Treat the container as a 3D box and generate the item’s 6 dimension permutations (3 axes × 2 flips).
- For each permutation, apply the constraint: item ≤ container on length, width, and height simultaneously.
- Check reachability — items longer than arm’s reach can’t be loaded all the way into the back corners.
- Subtract 1.5 in handling clearance on each axis for the mover’s grip plus pivot room.
- Verdict ladder (verdict-tiers.js, shared with door): FITS ≥ 2 in; FITS_TIGHT 0.5–2 in; FITS_VERY_TIGHT 0–0.5 in; DOESN'T_FIT below.
Interior dimensions use the published spec; door rails, ribs, and floor lashings can shave 1–2 in off the usable corners.
Dimensions
- item widthEstimated
- item depthEstimated
- item heightEstimated
- space widthEstimated
- space depthEstimated
- space heightEstimated
Space geometry
- Container floor is flat and rectangular
- No internal partitions or dunnage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.