Enter your couch dimensions and doorway measurements to find out instantly — no guesswork, no stuck furniture.
Whether it fits comes down to the measurements most people skip.
Real openings run about 1 to 2 inches under the labeled size, and a single inch can flip the result. Check your own measurements before you buy or move.
Verdicts compare all six item orientations against the space using verified building standards. See our methodology
“Checked my mattress before ordering. Tight fit, but it worked with the door removed.” — Online shopper
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
Sofa and couch are the same check — this free calculator works for sofas, couches, loveseats, and sectionals. Enter the sofa's length, depth, and height plus the door's clear width, and it returns an instant fits / tight-fit / fail verdict along with the best tilt angle. The dimension that decides it is the sofa's diagonal depth when tilted on its end, not the length, so a long 84" sofa often clears a 32" door that its length alone would suggest it can't.
01Yes — removing the door and hinges typically adds 1.5 to 2 inches of clearance. Use a pin punch to tap out hinge pins from below. Keep the screws in the hinge plates so you don't lose them.
02Most sofa legs unscrew or pop off, reducing height by 4 to 6 inches. Check for T-nuts or hex bolts underneath. Remove legs before attempting the doorway to avoid scratching both the couch and the frame.
03Tilting a couch vertically (on its end) is usually the best approach for narrow doors. Measure the diagonal from one bottom corner to the opposite top corner — that's the dimension that must clear the standard door width.
04Remove the door and hinges first (adds ~2 inches). Take off sofa legs (saves 4–6 inches of height). Stand the couch on its end and measure the diagonal — that dimension must be less than the door clear width. Angle the couch through the doorway at roughly 45 degrees, feeding the top through first, then pivot the base through. If you also need to navigate stairs, plan that route before you start.
05Related guides
More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculatorVerified results for this exact item at specific dimensions — see the margin, the tilt, and the constraint that decided each one.