Will an L-shaped desk fit through a 38" door?

✕ Does not fit — 3" too large [why-details] > Why it doesn't fit The item exceeds the opening in every orientation — no rotation or tilt resolves this. Tightest point: Item vs Opening (width axis) Remaining clearance: 3" (7.9%) [/why-details] [maneuver-details] > How to make it work The item exceeds the space in every orientation — standard entry won't work. Consider these alternatives: - Disassemble the item if possible - Check for wider doors or windows - Consider professional movers with pivot techniques [/maneuver-details] [difficulty-details] > Effort required Safety margin: Adequate Operational expectation: Standard handling — no special equipment or technique needed. [/difficulty-details] [details-below] What we used · Low Confidence Opening: 38"W × 80"H Item: item — smallest cross-section 35" (estimated) *Rotation required: laid on its side, longest dimension passing through* Assumptions - Item is rigid and cannot be compressed, bent, or disassembled - Space has perfectly square corners and flat surfaces - No obstructions (light fixtures, handrails, trim, furniture) in the path - Door opens fully (90° or more) and stays open during passage - Some dimensions were estimated — not provided by you. Verify before proceeding. - Detected sectional, size: medium - User provided length (110"). Using Medium L-sectional (110"×70"×35") typical depth (70") and height (35") for door-fit analysis - Door fit is determined by the smallest cross-section (depth × height), not length - Assumed standard door height: 80" (2032mm) - Applied 38mm practical clearance for handling All orientations tested (6 orientations) | | Orientation | Width | Height | Note | |---|------------|-------|--------|------| | ✓ ← | 35×70" (sideways) | 3" | 10" | | | ✗ | 35×110" (front/back) | 3" | -30" | too_tall | | ✗ | 70×35" (sideways) | -32" | 45" | too_wide | | ✗ | 70×110" (laid flat) | -32" | -30" | too_wide | | ✗ | 110×35" (front/back) | -72" | 45" | too_wide | | ✗ | 110×70" (laid flat) | -72" | 10" | too_wide | Step-by-step proof (best: 35×70") 1. Width: 35" item ≤ 38" opening → ✓ (3" clearance) 2. Height: 70" item ≤ 80" opening → ✓ (10" clearance) Limiting: width at 3" *Measure your specific space to confirm — dimensions vary.*