What door width for a sectional sofa?

✕ Does not fit — 0.25 ft too large [why-details] > Why it doesn't fit The item exceeds the opening in every orientation — no rotation or tilt resolves this. Tightest point: Item vs Opening (width axis) Remaining clearance: -0.25 ft (-50%) [/why-details] [maneuver-details] > How to make it work The item exceeds the space in every orientation — standard entry won't work. Consider these alternatives: - Disassemble the item if possible - Check for wider doors or windows - Consider professional movers with pivot techniques For a more complete analysis, provide: piece_split_type. [/maneuver-details] [difficulty-details] > Effort required Safety margin: Negative Operational expectation: Item exceeds the space — no handling technique can resolve the size difference. [/difficulty-details] [details-below] What we used · Low Confidence Assumptions - Item is rigid and cannot be compressed, bent, or disassembled - Space has perfectly square corners and flat surfaces - No obstructions (light fixtures, handrails, trim, furniture) in the path - Door opens fully (90° or more) and stays open during passage - Some dimensions were estimated — not provided by you. Verify before proceeding. - Detected sectional, size: medium - User provided length (110"). Using Medium L-sectional (110"×70"×35") typical depth (70") and height (35") for door-fit analysis - Door fit is determined by the smallest cross-section (depth × height), not length - Assumed standard door width: 32" - Assumed standard door height: 80" (2032mm) - Each piece assumed to be 110×70×35" (worst case — actual pieces likely smaller) Step-by-step proof *Measure your specific space to confirm — dimensions vary.*