A fridge goes through depth-first with the doors removed. Enter your refrigerator to see whether its depth clears a 30 in door.
A fridge never goes through on its width, so the door comparison most people make is the wrong one. Enter your cabinet depth for the real answer.
Real openings run about 1 to 2 inches under the labeled size, and a single inch can flip the result. Check your own measurements before you buy or move.
Verdicts compare all six item orientations against the space using verified building standards. See our methodology
“Checked my mattress before ordering. Tight fit, but it worked with the door removed.” — Online shopper
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
Usually yes, with the doors removed. Most refrigerators are 33 to 36 in wide but only about 28 to 29 in deep without the doors and handles, so they pass a 30 in door (about 28.5 in clear) depth-first.
01Almost always. With the doors on, the fridge is too wide for a 30 in opening. Remove the doors, handles, and hinges so the roughly 28 to 29 in cabinet depth becomes the face that passes through.
02A typical refrigerator with the doors removed needs about 28 to 29 in of clear opening on its depth, so a 30 in door (about 28.5 in clear) is roughly the minimum. Tighter than that usually means removing the door slab too or finding a wider entry.
03More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator