Will a desk (76x183x76 cm) fit in a space?
Expert analysis
A desk measuring 30 in × 72 in × 30 in does not fit in a space, but it's about 0.5 in too large at the tightest point.
It exceeds the opening at the tightest point.
Your desk will not clear the space — but only just — it is a hair over the limit at the tightest point. The opening_fit is the limiting constraint.
Handling: The item exceeds the space in every orientation — standard entry won't work.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 30 in | > | 29 in | −0.5 in | (−2.6%) | |
| DEPTH | not applicable | |||||
| HEIGHT | 30 in | ≤ | 6 ft 8 in | +4 ft 2 in | (+62.4%) | |
How the door-passage check works
A door is a 2D opening — width and height matter; depth (path length through the doorway) doesn’t.
- Generate all 6 dimension permutations of the item (3 axes × 2 flips).
- For each permutation, apply the door constraint: item_width ≤ door_width AND item_height ≤ door_height.
- Subtract 1.5 in handling clearance from each axis to leave room for human movement.
- Pick the permutation with the largest minimum-axis margin — that’s the orientation a mover would choose.
- Verdict ladder (verdict-tiers.js): FITS if margin ≥ 2 in; FITS_TIGHT if 0.5–2 in; FITS_VERY_TIGHT if 0–0.5 in; DOESN'T_FIT below.
Tolerance ±¼ in (6 mm) is applied implicitly (band promotion to FITS_VERY_TIGHT) — see the note below the orientation matrix.
Dimensions
No dimension-specific assumptions surfaced for this check.
Space geometry
- Square corners and a flat floor
- No trim, fixtures, or hardware protruding into the opening
- Door swings fully open (90°+) and stays open during passage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Other assumptions
- Item is rigid and cannot be compressed, bent, or disassembled
- Space has perfectly square corners and flat surfaces
- No obstructions (light fixtures, handrails, trim, furniture) in the path
- Door opens fully (90° or more) and stays open during passage
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.