Will a standard fridge (30"×30"×68") (76x86x178 cm) fit through an 81 cm door?
Expert analysis
A standard fridge (30"×30"×68") measuring 30 in × 34 in × 70 in does not fit through a door, with about 2 in to spare at the tightest point. The binding dimension is width: that is the axis where the standard fridge (30"×30"×68") runs out of room.
It exceeds the opening at the tightest point.
- The width axis runs out of room.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 30 in | ≤ | 32 in | +2 in | (+6.3%) | |
| DEPTH | not applicable (2D opening — door) | |||||
| HEIGHT | 5 ft 10 in | ≤ | 6 ft 8 in | +10 in | (+12.5%) | |
| Orientation | Width | Height | Result | Note |
|---|---|---|---|---|
| ✓ chosen2.5×5.83 ft (front/back) | 0.17 ft | 0.83 ft | ✓ | |
| 2.5×2.83 ft (laid flat) | 0.17 ft | 3.83 ft | ✓ | |
| 2.83×5.83 ft (sideways) | -0.17 ft | 0.83 ft | ✕ | Too wide |
| 2.83×2.5 ft (laid flat) | -0.17 ft | 4.17 ft | ✕ | Too wide |
| 5.83×2.5 ft (front/back) | -3.17 ft | 4.17 ft | ✕ | Too wide |
| 5.83×2.83 ft (sideways) | -3.17 ft | 3.83 ft | ✕ | Too wide |
Margins shown are calculated; allow ±¼ in for tape-measure precision.
How the door-passage check works
A door is a 2D opening — width and height matter; depth (path length through the doorway) doesn’t.
- Generate all 6 dimension permutations of the item (3 axes × 2 flips).
- For each permutation, apply the door constraint: item_width ≤ door_width AND item_height ≤ door_height.
- Subtract 1.5 in handling clearance from each axis to leave room for human movement.
- Pick the permutation with the largest minimum-axis margin — that’s the orientation a mover would choose.
- Verdict ladder (verdict-tiers.js): FITS if margin ≥ 2 in; FITS_TIGHT if 0.5–2 in; FITS_VERY_TIGHT if 0–0.5 in; DOESN'T_FIT below.
Tolerance ±¼ in (6 mm) is applied implicitly (band promotion to FITS_VERY_TIGHT) — see the note below the orientation matrix.
Dimensions
- MEASUREDDetected refrigerator, sizemedium
- MEASUREDEstimated depth, height from local_db (depth, height not provided by user)
- STANDARDDoor width32"
- STANDARDDoor height80" (2032mm)
- MEASUREDApplied 38mm practical clearance for handling
Space geometry
- Square corners and a flat floor
- No trim, fixtures, or hardware protruding into the opening
- Door swings fully open (90°+) and stays open during passage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.