Will a queen bed (170x227x148 cm) fit in a space?
Expert analysis
A queen bed measuring 5 ft 7 in × 7 ft 5 in × 4 ft 10 in fits in a space, with about 1 ft 11.5 in to spare at the tightest point.
It fits with clearance on every axis.
Your queen bed will fit, with comfortable room to spare — enough to move through without scraping.
Handling: Slide the item straight through the opening in its narrowest orientation.
| Axis-aligned check (before rotation) | ||||||
| WIDTH | 5 ft 7 in | ≤ | 9 ft 5 in | +3 ft 10 in | (+40.6%) | |
| DEPTH | 7 ft 5 in | ≤ | 11 ft | +3 ft 6.5 in | (+32.2%) | |
| HEIGHT | 4 ft 10 in | ≤ | 8 ft | +3 ft 2 in | (+39.3%) | |
| Orientation | Width | Height | Result |
|---|---|---|---|
| ✓ chosen0° (as-is), short wall | — | — | ✓ |
| 0° (as-is), short wall | — | — | ✓ |
| 0° (as-is), short wall | — | — | ✓ |
| 0° (as-is), short wall | — | — | ✓ |
| 0° (as-is), long wall | — | — | ✓ |
| 0° (as-is), long wall | — | — | ✓ |
| 0° (as-is), long wall | — | — | ✓ |
| 0° (as-is), long wall | — | — | ✕ |
| 90° rotated, short wall | — | — | ✓ |
| 90° rotated, short wall | — | — | ✓ |
| 90° rotated, short wall | — | — | ✓ |
| 90° rotated, short wall | — | — | ✓ |
| 90° rotated, long wall | — | — | ✓ |
| 90° rotated, long wall | — | — | ✓ |
| 90° rotated, long wall | — | — | ✓ |
| 90° rotated, long wall | — | — | ✓ |
| 1° diagonal | — | — | ✓ |
Margins shown are calculated; allow ±¼ in for tape-measure precision.
How the door-passage check works
A door is a 2D opening — width and height matter; depth (path length through the doorway) doesn’t.
- Generate all 6 dimension permutations of the item (3 axes × 2 flips).
- For each permutation, apply the door constraint: item_width ≤ door_width AND item_height ≤ door_height.
- Subtract 1.5 in handling clearance from each axis to leave room for human movement.
- Pick the permutation with the largest minimum-axis margin — that’s the orientation a mover would choose.
- Verdict ladder (verdict-tiers.js): FITS if margin ≥ 2 in; FITS_TIGHT if 0.5–2 in; FITS_VERY_TIGHT if 0–0.5 in; DOESN'T_FIT below.
Tolerance ±¼ in (6 mm) is applied implicitly (band promotion to FITS_VERY_TIGHT) — see the note below the orientation matrix.
Dimensions
- MEASUREDSpace is emptyno existing furniture or items blocking the path
- MEASUREDCeiling height assumed 8ftnot measured
- MEASUREDInterpreted "67×89.5×58.25" as inchessay "cm", "feet", or "m" in your message if you meant otherwise
- MEASUREDAssumed ft for space dimensions
- MEASUREDDetected bed, sizequeen
- MEASURED36" primary walkway minimum (ADA-style guideline, not code)
Space geometry
- Square corners and a flat floor
- No trim, fixtures, or hardware protruding into the opening
- Door swings fully open (90°+) and stays open during passage
Handling
- ±¼ in tape-measure tolerance applied
- 1.5 in handling clearance subtracted from raw margins before the verdict
- Item treated as rigid — cannot compress, bend, or disassemble.
Why we make assumptions
ItemFits fills in anything you don’t measure yourself. Whenever you see [standard], the real value in your home may differ — measure it and message us in the chat below; we’ll re-run the math.
Similar calculations
Run your own fit check
Ask about a different item, door, or route. Free, no signup.