Last updated: March 2026
Mattresses stand on edge in elevators. A king (80" long) needs 80"+ ceiling height. Even small elevators work if the ceiling is tall enough.
Whether it fits depends on measurements most people get wrong.
Mattress on edge: thickness (10–14") is floor width, length (80") is height needed.
Item: King: 76"×80"×10–14" thick. On edge: 14"×76"×80" tall.
Space: Residential elevator: 56–60"D × 80"W × 84–96"H. Ceiling is the key dimension.
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
1 inch can be the difference between fitting and getting stuck.
“Showed the delivery guy the measurements. He agreed — we used the freight elevator instead.” — Apartment dweller
Measurements verified by the ItemFits engineering team · Our methodology
Standard sizes say it works — but your measurements are what matter.
A king mattress on edge (10–14" × 76" × 80" tall) fits any elevator with 80"+ ceiling height and 14"+ of floor space. Most residential elevators (84"+ ceiling) work. Width (76") must fit within the elevator width.
Tilt the mattress diagonally — lean the top against one wall. A 80" mattress at a 10° tilt fits in a 79" ceiling. For very short cabs, bend a flexible mattress into a gentle curve.