Enter your couch dimensions and doorway measurements to find out instantly — no guesswork, no stuck furniture.
Whether it fits depends on measurements most people get wrong.
Couch diagonal (corner-to-corner when tilted) vs. door clear width
Item: Standard 3-seat couch: 84" L × 35" W × 33" H
Space: Standard interior door: 80" H × 32" W clear opening
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
“Checked my mattress before ordering. Tight fit, but it worked with the door removed.” — Online shopper
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
Yes — removing the door and hinges typically adds 1.5 to 2 inches of clearance. Use a pin punch to tap out hinge pins from below. Keep the screws in the hinge plates so you don't lose them.
01Most sofa legs unscrew or pop off, reducing height by 4 to 6 inches. Check for T-nuts or hex bolts underneath. Remove legs before attempting the doorway to avoid scratching both the couch and the frame.
02Tilting a couch vertically (on its end) is usually the best approach for narrow doors. Measure the diagonal from one bottom corner to the opposite top corner — that's the dimension that must clear the standard door width.
03Remove the door and hinges first (adds ~2 inches). Take off sofa legs (saves 4–6 inches of height). Stand the couch on its end and measure the diagonal — that dimension must be less than the door clear width. Angle the couch through the doorway at roughly 45 degrees, feeding the top through first, then pivot the base through. If you also need to navigate stairs, plan that route before you start.
04More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator