Can I stand a mattress on its side in the hallway?

Yes — this is the standard technique. A queen mattress on its long edge is only 10–14 inches thick, which easily clears any hallway. The challenge is the 80-inch length, which needs ceiling clearance. For low ceilings, tilt the mattress at an angle instead of fully vertical.

How do I get a mattress around a hallway corner?

Stand the mattress on edge and pivot it around the inside corner. For foam mattresses, you can bend them slightly at the turn. For innerspring mattresses, you may need to tilt the mattress at varying angles as you navigate the corner. Having two people makes this much easier.

Can I fold a foam mattress to fit through the hallway?

Yes — all-foam and memory foam mattresses can be folded in half or rolled for short moves without damage. Use ratchet straps to keep it compressed. Do not leave it folded for more than a few hours. Innerspring and hybrid mattresses should not be folded.

Which mattress sizes cause hallway problems?

King mattresses (76" wide) are the most problematic — they are wider than most hallways when carried flat. Queen (60"), full (54"), and twin (38") sizes rarely cause straight-section issues when carried on edge. The main challenge for all sizes is navigating hallway corners.

ItemFits

About•FAQ•Features•Pricing

Home / Hallway & Corridor Navigation

Will a Mattress Fit Through the Hallway?

Enter your mattress size and hallway measurements — the app checks straight sections and corner turns for king, queen, full, or twin.

Trusted across thousands of fit checks · updated daily

Scan items/space

Language: Português

Voice input

400 questions answered

Room Preview·Visual Results·Simulations

Whether it fits depends on measurements most people get wrong.

Key Measurement

Mattress thickness (on edge) vs. hallway width, and mattress length vs. turning space at corners

Standard Dimensions

Item: Queen: 60" × 80" × 10–14" thick. King: 76" × 80" × 10–14" thick

Space: Standard residential hallway: 42–48" wide. Building code minimum: 36" wide

Actual clear openings are usually 1–2″ smaller than the labeled size.

Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.

Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology

Takes 10 seconds · No signup needed

10,000+ fit checks run·Last check: a few minutes ago

“Saved me from a $200 return — the couch was 2 inches too wide for the doorway.” — Online shopper

Measure smart

What to measure.

Four numbers decide nearly every fit check. Get these right and the rest follows.

01Mattress flexibility: foam mattresses bend around corners, while rigid innerspring types must be carried flat or on edge with no flex
02On-edge thickness (10–14") vs. hallway width — a mattress on its side easily clears even a 36" code-minimum corridor
03Corner bending radius for foam mattresses — a queen foam mattress can bend around a corner with a ~24" inside radius
04Hallway corner dimensions: innerspring mattresses require full pivot space at turns, while foam types can flex through tighter angles

Don't make these

Common mistakes.

Most “it didn't fit” stories trace back to one of these oversights.

⚠Assuming all mattresses can flex — innerspring and hybrid types are rigid and must navigate corners like a solid panel, not a flexible sheet
⚠Carrying the mattress flat through the hallway when standing it on edge (only 10–14" thick) would clear any corridor width
⚠Forgetting that rigid innerspring mattresses need full pivot geometry at corners — they can't bend around tight turns like foam types
⚠Not checking ceiling height for on-edge transport — an 80" mattress on its long edge needs 80" of overhead clearance the entire route

Frequently asked

Questions we keep getting.

Can I stand a mattress on its side in the hallway?
Yes — this is the standard technique. A queen mattress on its long edge is only 10–14 inches thick, which easily clears any hallway. The challenge is the 80-inch length, which needs ceiling clearance. For low ceilings, tilt the mattress at an angle instead of fully vertical.
01
How do I get a mattress around a hallway corner?
Stand the mattress on edge and pivot it around the inside corner. For foam mattresses, you can bend them slightly at the turn. For innerspring mattresses, you may need to tilt the mattress at varying angles as you navigate the corner. Having two people makes this much easier.
02
Can I fold a foam mattress to fit through the hallway?
Yes — all-foam and memory foam mattresses can be folded in half or rolled for short moves without damage. Use ratchet straps to keep it compressed. Do not leave it folded for more than a few hours. Innerspring and hybrid mattresses should not be folded.
03
Which mattress sizes cause hallway problems?
King mattresses (76" wide) are the most problematic — they are wider than most hallways when carried flat. Queen (60"), full (54"), and twin (38") sizes rarely cause straight-section issues when carried on edge. The main challenge for all sizes is navigating hallway corners.
04

Related fit checks.

Will a Mattress Fit Around a Hallway Corner?Check if your mattress will fit around a hallway corner. Twin, full, queen, and king — calculate the turning radius needed for 90° corridor turns.Will a Mattress Fit Up the Stairs?Check if your mattress will fit up a staircase. Covers king, queen, full, and twin sizes for straight stairs and landing turns.

Unlock stair simulation, AR visualization, and more.

Will it fit? Know before you buy.

Open the calculator and check any item against any space.

Open the fit calculator

ItemFits

About•FAQ•Features•Pricing

Home / Hallway & Corridor Navigation

Will a Mattress Fit Through the Hallway?

Enter your mattress size and hallway measurements — the app checks straight sections and corner turns for king, queen, full, or twin.

Trusted across thousands of fit checks · updated daily

Scan items/space

Language: Português

Voice input

400 questions answered

Room Preview·Visual Results·Simulations

Whether it fits depends on measurements most people get wrong.

Key Measurement

Mattress thickness (on edge) vs. hallway width, and mattress length vs. turning space at corners

Standard Dimensions

Item: Queen: 60" × 80" × 10–14" thick. King: 76" × 80" × 10–14" thick

Space: Standard residential hallway: 42–48" wide. Building code minimum: 36" wide

Actual clear openings are usually 1–2″ smaller than the labeled size.

Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.

Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology

Takes 10 seconds · No signup needed

10,000+ fit checks run·Last check: a few minutes ago

“Saved me from a $200 return — the couch was 2 inches too wide for the doorway.” — Online shopper

Measure smart

What to measure.

Four numbers decide nearly every fit check. Get these right and the rest follows.

01Mattress flexibility: foam mattresses bend around corners, while rigid innerspring types must be carried flat or on edge with no flex
02On-edge thickness (10–14") vs. hallway width — a mattress on its side easily clears even a 36" code-minimum corridor
03Corner bending radius for foam mattresses — a queen foam mattress can bend around a corner with a ~24" inside radius
04Hallway corner dimensions: innerspring mattresses require full pivot space at turns, while foam types can flex through tighter angles

Don't make these

Common mistakes.

Most “it didn't fit” stories trace back to one of these oversights.

⚠Assuming all mattresses can flex — innerspring and hybrid types are rigid and must navigate corners like a solid panel, not a flexible sheet
⚠Carrying the mattress flat through the hallway when standing it on edge (only 10–14" thick) would clear any corridor width
⚠Forgetting that rigid innerspring mattresses need full pivot geometry at corners — they can't bend around tight turns like foam types
⚠Not checking ceiling height for on-edge transport — an 80" mattress on its long edge needs 80" of overhead clearance the entire route

Frequently asked

Questions we keep getting.

Can I stand a mattress on its side in the hallway?
Yes — this is the standard technique. A queen mattress on its long edge is only 10–14 inches thick, which easily clears any hallway. The challenge is the 80-inch length, which needs ceiling clearance. For low ceilings, tilt the mattress at an angle instead of fully vertical.
01
How do I get a mattress around a hallway corner?
Stand the mattress on edge and pivot it around the inside corner. For foam mattresses, you can bend them slightly at the turn. For innerspring mattresses, you may need to tilt the mattress at varying angles as you navigate the corner. Having two people makes this much easier.
02
Can I fold a foam mattress to fit through the hallway?
Yes — all-foam and memory foam mattresses can be folded in half or rolled for short moves without damage. Use ratchet straps to keep it compressed. Do not leave it folded for more than a few hours. Innerspring and hybrid mattresses should not be folded.
03
Which mattress sizes cause hallway problems?
King mattresses (76" wide) are the most problematic — they are wider than most hallways when carried flat. Queen (60"), full (54"), and twin (38") sizes rarely cause straight-section issues when carried on edge. The main challenge for all sizes is navigating hallway corners.
04

Related fit checks.

Unlock stair simulation, AR visualization, and more.

Will it fit? Know before you buy.

Open the calculator and check any item against any space.

Open the fit calculator