Measurements
Cargo dimensions.
| Length | Width | Height | Volume | |
|---|---|---|---|---|
| Truck bed | 54" | 50" | 18" | 29.2 cu ft |
| Truck bed (longest listed) | 54" | 50" | 18" | 29.2 cu ft |
| Opening | – | 50" | 18" | – |
What fits
What fits in a Rivian R1T?
Measure smart
What to measure.
Four numbers decide nearly every fit check. Get these right and the rest follows.
- 01The bed floor length with the tailgate closed, from the front wall to the tailgate, then again with the tailgate down for long loads.
- 02The width between the wheel wells: anything that must lie flat on the floor has to fit between them.
- 03The width wall to wall: a load wider than the wheel wells can only rest on top of them, up to this width.
- 04The bed depth from the floor to the top of the walls. A load taller than the walls is not blocked, but it needs strapping down.
Don't make these
Common mistakes.
Most “it didn't fit” stories trace back to one of these oversights.
- ⚠Measuring the width at the top of the bed walls instead of between the wheel wells, where a flat load actually sits.
- ⚠Treating a load that rests across the wheel wells as a sure fit: check that it sits flat and level on them before you strap it down.
- ⚠Counting the lowered tailgate as bed floor: it holds less weight than the bed, and a load longer than the bed with the tailgate down hangs out past it, which may need a flag under your state's rules.
- ⚠Assuming every cab and box of your model has the same bed: short and long boxes differ by a foot or more, so measure your own.
Frequently asked
Questions we keep getting.
How much cargo space does a Rivian R1T have?
29.2 cu ft in the 4.5 ft bed, 11.0 cu ft in the frunk, and 11.7 cu ft in the gear tunnel behind the rear seats. Combined 51.9 cu ft of lockable cargo — most of any mainstream pickup.
01What is the R1T gear tunnel?
A 65" wide horizontal pass-through behind the rear seats, accessed from both sides of the truck. Holds skis, camping gear, wet wetsuits, or acts as a step to the roof. Unique to the R1T.
02R1T vs. Lightning bed?
Lightning has a longer bed (67" vs. 54" closed) and bigger frunk (14.1 vs. 11.0 cu ft). R1T counters with the gear tunnel (+11.7 cu ft) and an inside-the-bed wall box. Lightning hauls more plywood; R1T stores more gear.
03
Go deeper