러닝머신의 치수와 엘리베이터 측정값을 입력하세요. 이 앱이 문 개구부, 엘리베이터 내부, 그리고 무게 용량을 확인합니다.
Whether it fits depends on measurements most people get wrong.
러닝머신 너비 대 엘리베이터 문 너비, 그리고 접힌 길이 대 캐빈 깊이
Item: 표준 러닝머신: 64–84인치 L × 28–40인치 W × 55–63인치 H (200–350파운드). 접음: 35–50인치 L
Space: 주거용 엘리베이터: 36–42인치 W × 80인치 H 문, 54인치 W × 51–80인치 D × 84인치 H 캐빈
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
“Showed the delivery guy the measurements. He agreed — we used the freight elevator instead.” — Apartment dweller
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
대부분의 홈 러닝머신(28–35인치 너비)은 표준 36인치 엘리베이터 문을 통과합니다. 더 넓은 상업용 모델(36–40인치)은 매우 타이트하거나 36인치 문을 통과하지 못할 수 있으므로 정확한 문 개구부를 측정하세요. 데크를 접고 콘솔 마스트를 제거하여 프로필을 줄이세요. 필요하면 러닝머신을 살짝 기울여서 더 넓은 베이스를 문으로 각도를 맞춰 통과하세요.
01데크를 접고(길이를 35–50인치로 줄임) 러닝머신을 끝으로 세우세요. 이 방향에서 러닝머신은 약 28–40인치 × 10–15인치 바닥 공간을 차지하고 35–50인치 높이로 서 있습니다. 이것은 어떤 엘리베이터 캐빈에도 들어갑니다. 탑승 중 기울어짐을 방지하려면 캐빈 벽에 끈으로 묶으세요.
02표준 주거용 엘리베이터(2,100–2,500파운드 용량)의 경우 가능성이 낮습니다. 350파운드 러닝머신 + 40파운드 대차 + 2명의 200파운드 이사 = 총 790파운드입니다. 그러나 엘리베이터 내부의 게시된 용량 판을 확인하세요. 오래된 건물은 1,500파운드로 등급이 지정될 수 있습니다. 화물 엘리베이터는 일반적으로 4,000–10,000파운드로 등급이 지정됩니다.
03가능하면 그렇습니다. 화물 엘리베이터 문은 48–60인치 너비(일반의 36인치 대비)이며 캐빈은 훨씬 깊습니다. 이것은 접기, 기울이기, 또는 러닝머신 분해 필요성을 제거합니다. 많은 건물이 100파운드 이상의 항목에 화물 엘리베이터 사용을 요구합니다. 건물 관리실에 확인하고 미리 엘리베이터를 예약하세요.
04More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator