소파 치수와 엘리베이터 측정값을 입력하여 이동을 계획하세요 - 문 개방, 캐빈 내부, 기울임 각도.
Whether it fits depends on measurements most people get wrong.
소파 치수(기울임) 대 엘리베이터 문 개방, 그리고 소파 대각선 대 캐빈 내부 대각선
Item: 표준 3인용 소파: 84 inches L × 35 inches W × 33 inches H
Space: 주택용 엘리베이터: 36 inches W × 80 inches H 문 개방, 54 inches W × 80 inches D × 84 inches H 캐빈 내부
Actual clear openings are usually 1–2″ smaller than the labeled size.
Your exact dimensions probably aren't "standard." Small measurement errors cause big problems — 1 inch can be the difference between fitting and getting stuck.
Verdicts are calculated by comparing all 6 item orientations against the space dimensions using verified building code standards. See our methodology
Takes 10 seconds · No signup needed
“Showed the delivery guy the measurements. He agreed — we used the freight elevator instead.” — Apartment dweller
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
소파를 끝에 기울이세요(수직). 84 inches 길고 35 inches 넓은 소파는 똑바로 세웠을 때 35 inches × 33 inches의 바닥 공간을 가집니다 - 대부분의 엘리베이터 문 범위 내입니다. 84 inches 높이는 문 프레임 높이를 통과해야 하므로(전형적으로 80 inches), 약간 각도를 조정해야 할 수 있습니다.
01네 - 캐빈 대각선은 항상 단일 치수보다 깁니다. 일반적인 주택용 캐빈(54 inches × 80 inches)은 약 97 inches의 바닥 대각선을 가집니다. 소파를 끝에 기울인 후 캐빈 내에서 모서리-모서리로 각도를 조정하여 최대 간격을 얻으세요.
02항상. 화물 또는 서비스 엘리베이터는 승객용 엘리베이터보다 20~40% 더 큽니다. 대부분의 주택용 건물은 이동 중 사용을 요구하는 하나를 가지고 있습니다. 일정 요구 사항에 대해 건물의 이동-입력 정책을 확인하면서 예약하기 24~48시간 전에 건물 관리자에게 연락하세요.
03이것은 일반적입니다 - 문이 캐빈보다 좁습니다. 소파 다리를 제거하고(4~6 inches의 높이 절약), 끝에 기울이고, 문을 통해 각도를 조정하세요. 일부 건물은 추가 간격을 위해 문 범퍼 패드를 제거할 수 있습니다. 건물 유지관리를 문의하세요.
04More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator