소파 치수와 도어 치수를 입력하세요 — 즉시 알아내세요 — 추측 없음, 끼인 가구 없음.
Whether it fits comes down to the measurements most people skip.
Real openings run about 1 to 2 inches under the labeled size, and a single inch can flip the result. Check your own measurements before you buy or move.
Verdicts compare all six item orientations against the space using verified building standards. See our methodology
“Checked my mattress before ordering. Tight fit, but it worked with the door removed.” — Online shopper
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
네 — 도어와 경첩을 제거하면 일반적으로 1.5-2 inches의 클리어런스를 추가합니다. 핀 펀치를 사용하여 아래에서 경첩 핀을 두드립니다. 경첩 플레이트의 나사를 잃지 않도록 보관하세요.
01대부분의 소파 다리는 나사로 풀리거나 빠져나가며, 높이를 4-6 inches만큼 줄입니다. 아래에서 T-너트 또는 hex bolts를 확인하세요. 도어 방식을 시도하기 전에 다리를 제거하여 소파와 프레임을 긁는 것을 피하세요.
02소파를 수직으로 기울이기(끝에 있음)는 좁은 도어에 일반적으로 최선의 방법입니다. 한 아래 모서리에서 반대 위 모서리로 대각선을 측정하세요 — 그 치수가 표준 도어 넓이를 클리어해야 합니다.
03도어와 경첩을 먼저 제거합니다(약 2 inches 추가). 소파 다리를 빼세요(4-6 inches 높이 절약). 소파를 끝에 세우고 대각선을 측정하세요 — 그 치수가 도어 클리어 넓이보다 작아야 합니다. 대략 45도 각도로 소파를 도어을 통해 각지게 하여, 위를 먼저 공급한 후, 베이스를 통해 피벗합니다. 계단도 네비게이트해야 한다면 시작하기 전에 그 경로를 계획하세요.
04More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator