What is the standard hallway width in the US?

Building codes require a minimum of 36 inches for residential hallways. Most modern homes have hallways 42–48 inches wide. Older apartments may have hallways as narrow as 34–36 inches.

How do I navigate a hallway corner with large furniture?

Tilt the item vertically (on its end) to reduce the footprint at the turn. Have one person guide the top while the other controls the base. For L-shaped turns, pivot the item around the inside corner — the wider the hallway on both sides of the turn, the easier this is.

What if my hallway is too narrow for my furniture?

Try tilting the item on its side or standing it upright to reduce its footprint. Remove any protruding legs, handles, or cushions. If the hallway has doors along it, open or remove them for extra clearance. As a last resort, check for an alternate route through a different room or exterior entry.

Do hallway turns have different clearance than straight sections?

Yes — turns are almost always the tightest constraint. A 90-degree hallway corner requires significantly more space than the straight corridor width because the item must pivot. The usable turning space depends on the width of both corridors meeting at the corner.

Should I measure the hallway with or without baseboards?

Measure wall-to-wall and then subtract baseboard thickness on each side (typically 0.5–0.75 inches per side). Baseboards reduce the usable width by 1–1.5 inches total. If the furniture will be carried above baseboard height, you can use the wall-to-wall measurement.

廊下計算ツール — 廊下通過クリアランスを確認 | ItemFits

ItemFits

About•Blog•FAQ•Features•Pricing•Work with us

Home / Hallway & Corridor Navigation

Will It Fit Through the Hallway?

Select an item below for a quick check, or enter custom dimensions to test any hallway clearance.

This calculator determines if furniture, appliances, and large items will fit through residential hallways. We account for hallway width, corner turning radius, ceiling clearance, and obstacles like radiators and wall-mounted fixtures—covering straight corridors, L-shaped turns, T-junctions, and narrow apartment hallways.

1 questions answered · updated daily

Scan items/space

Language: 日本語

Voice input

400 questions answered

Try

Three possible answers

Real verdicts, with the math behind them.

Every check returns one of three outcomes — with the dimensions, the constraints that mattered, and exactly how we reached the verdict.

Fits

Loveseat · 40″ hallway with 90° turn

60×34×34 in. Inside-corner pivot has 8″ of swing clearance after subtracting baseboards. Tilt 30° to clear.

Tight fit

Queen box spring · 34″ hallway

60×80×10 in. Standing on edge, clears by 2″ on each side. Watch for door-frame protrusions along the corridor.

Does not fit

Sectional couch · 30″ apartment hall

120×40×38 in. Even tilted to 38″ height, the 30″ wall-to-wall is 8″ short. Plan to disassemble at the connector or use an alternate entry.

Choose your item

Pre-built fit checks by category.

Try it yourself

Check any item against any space — it's free.

Measure smart

What to measure.

Four numbers decide nearly every fit check. Get these right and the rest follows.

01Hallway width at the narrowest point — measure wall-to-wall, accounting for any protruding radiators, doorframes, or wall-mounted fixtures.
02Hallway length — measure straight sections between turns to determine your maneuvering space.
03Corner angles and widths — measure the width of both corridors at each turn, and note whether it's a 90° L-turn or a wider angle.
04Ceiling height — check for low ceilings, soffits, light fixtures, or overhead ducts that limit how much you can tilt items vertically.

Don't make these

Common mistakes.

Most “it didn't fit” stories trace back to one of these oversights.

⚠Measuring hallway width at the widest point instead of the narrowest — radiators, doorframes, and baseboards can reduce usable width by 2–4 inches.
⚠Forgetting that the turning point at a corner is the real bottleneck, not the straight hallway sections.
⚠Not accounting for door frames along the hallway that protrude 1–2 inches into the corridor on each side.
⚠Assuming a long item can be carried flat through a turn — most require tilting vertically or pivoting around the corner.

Frequently asked

Questions we keep getting.

What is the standard hallway width in the US?
Building codes require a minimum of 36 inches for residential hallways. Most modern homes have hallways 42–48 inches wide. Older apartments may have hallways as narrow as 34–36 inches.
01
How do I navigate a hallway corner with large furniture?
Tilt the item vertically (on its end) to reduce the footprint at the turn. Have one person guide the top while the other controls the base. For L-shaped turns, pivot the item around the inside corner — the wider the hallway on both sides of the turn, the easier this is.
02
What if my hallway is too narrow for my furniture?
Try tilting the item on its side or standing it upright to reduce its footprint. Remove any protruding legs, handles, or cushions. If the hallway has doors along it, open or remove them for extra clearance. As a last resort, check for an alternate route through a different room or exterior entry.
03
Do hallway turns have different clearance than straight sections?
Yes — turns are almost always the tightest constraint. A 90-degree hallway corner requires significantly more space than the straight corridor width because the item must pivot. The usable turning space depends on the width of both corridors meeting at the corner.
04
Should I measure the hallway with or without baseboards?
Measure wall-to-wall and then subtract baseboard thickness on each side (typically 0.5–0.75 inches per side). Baseboards reduce the usable width by 1–1.5 inches total. If the furniture will be carried above baseboard height, you can use the wall-to-wall measurement.
05

References

Built on published standards.

Clearances and minimums in these checks trace back to established building codes and accessibility guidelines.

IRC R311.6Hallways — minimum width 36 in. View source
ADA 403Accessible routes — minimum clear width and passing space View source
ANSI A117.1Accessible and Usable Buildings and Facilities View source

Keep exploring

Explore other fit calculators.

Will It Fit Through Your Door?Instantly check if your large item will fit through a doorway. Enter door dimensions and item measurements to get a 3D fit analysis with clearance calculations.Will It Fit in Your Vehicle?Check if your items will fit in a car, SUV, or cargo van. Enter vehicle cargo dimensions and item measurements for an instant 3D fit analysis.Will It Fit Up Your Stairs?Check if your item will fit up or down stairs. Enter staircase dimensions for 3D analysis of clearance, turning radius, and landing space.Will It Fit in the Elevator?Check if your item will fit in an elevator. Enter elevator cab dimensions and item measurements for instant 3D clearance analysis.Will It Fit in Your Container?Check if your items will fit in a suitcase, bag, or box. Enter container dimensions and item measurements for instant fit analysis.Will It Fit in Your Room?Check if your items will fit in your room. Enter room dimensions and item measurements to see layout options, walking clearances, and door swing zones.Will It Fit Through a Window?Check if your furniture will fit through a window opening. Free calculator for high-rise moves, tight-access deliveries, and hoisting scenarios.

Unlock stair simulation, AR visualization, and more.

Will it fit? Know before you buy.

Enter your item and hallway dimensions — get an instant verdict on tilt, turn, and clearance.

Open the fit calculator