输入您的物品尺寸和楼梯测量数据来规划搬运——包括平台、转弯和通行空间。
Whether it fits comes down to the measurements most people skip.
Real openings run about 1 to 2 inches under the labeled size, and a single inch can flip the result. Check your own measurements before you buy or move.
Verdicts compare all six item orientations against the space using verified building standards. See our methodology
“Wish I'd used this before trying to force a fridge up the stairs.” — Lesson learned
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
大多数木质栏杆顶部和底部用方头螺栓固定。拆除栏杆可以增加3到5英寸的可用宽度。拆除前标记好螺栓位置,以便之后重新安装。金属栏杆可能是焊接的,无法轻易拆除。
01站在平台上,测量从内角到对面墙壁的最短距离。然后测量平台深度(与上层梯段平行)。您的家具必须能在这个矩形空间内转向——长物品可能需要竖直倾斜才能通过转弯。
02如果楼梯有90度或180度转弯,且平台深度不足40英寸,强烈建议雇用配备爬楼设备的专业搬运工。他们配有家具毯、绑带和肩抬推车,能让狭窄通行空间对物品和墙壁都更安全。
03More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator