输入您的书桌尺寸和楼梯测量数据来规划搬运——L 形、升降式或标准书桌均可。
Whether it fits comes down to the measurements most people skip.
Real openings run about 1 to 2 inches under the labeled size, and a single inch can flip the result. Check your own measurements before you buy or move.
Verdicts compare all six item orientations against the space using verified building standards. See our methodology
“Wish I'd used this before trying to force a fridge up the stairs.” — Lesson learned
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
几乎总是应该。把桌面从支架上拆下来(通常 4–8 颗螺栓)。拆除任何抽屉柜、显示器支架或走线槽。每个单独的部件更轻、更窄,在楼梯平台处更易于操控。拆解前拍照以便日后重新组装时参考。
01把 L 形书桌分成两段桌面(转角接合处的螺栓或支架),卸下桌腿/支架,逐件搬运。每段通常长 48–60"、深 24–30"——在大多数楼梯上都好处理。转角连接支架是个小件,可以手提。
02可以——把桌面从支架上拆下来。升降桌支架(宽 24–30")能通过任何楼梯。桌面(长 48–72")在平台处可能需要竖着搬运。电动升降电机会增加重量(支架总重 50–80 磅),但搬运上楼时无需从支架上拆下。
03先拆下所有抽屉——它们能抽出,可大幅减轻重量。如果书桌带固定柜(抽屉不可拆),则测量整个单元。大多数带柜书桌为宽 60" × 深 30",侧立倾斜时能搬上楼梯,但很重(100–150 磅)。
04More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator