침대 프레임 치수와 계단 크기를 입력하세요 — 앱이 헤드보드, 측면 레일 및 랜딩 공간을 확인합니다.
Whether it fits comes down to the measurements most people skip.
Real openings run about 1 to 2 inches under the labeled size, and a single inch can flip the result. Check your own measurements before you buy or move.
Verdicts compare all six item orientations against the space using verified building standards. See our methodology
“Wish I'd used this before trying to force a fridge up the stairs.” — Lesson learned
Measure smart
Four numbers decide nearly every fit check. Get these right and the rest follows.
Don't make these
Most “it didn't fit” stories trace back to one of these oversights.
Frequently asked
항상입니다. 침대 프레임은 분해를 염두에 두고 설계되었습니다 — 헤드보드, 풋보드 및 측면 레일을 연결 해제하세요. 슬랫을 제거하고 모든 하드웨어(볼트, 캠 잠금장치, 배럴 너트)를 담으세요. 각 부분이 표준 계단을 개별적으로 통과합니다. 부분에 라벨을 붙이고 재조립을 위해 사진을 찍으세요.
01킹 헤드보드(76-80 inches 너비)는 모서리에 또는 직립으로 기울여서 운반해야 합니다. 모서리에서는 헤드보드의 두께(2-6 inches)만 계단 너비를 통과합니다. 랜딩에서 수직으로 기울이고 코너를 중심으로 회전시키세요. 2명이 필요합니다 — 한 명은 상단을 가이드하고, 한 명은 베이스를 지원합니다.
02플랫폼 침대는 일반적으로 2-4개의 프레임 섹션과 슬랫으로 분리됩니다. 각 프레임 섹션은 보통 40 inches 이하의 너비이며 모든 계단통로를 통과합니다. 슬랫은 개별 부분(3-4 inches 너비 × 75-80 inches 길이)으로 운반하기 쉽습니다. 플랫폼에 수납공간이 있으면 분해 전에 모든 서랍을 제거하세요.
03조절식(전동) 침대 프레임은 더 무겁습니다(프레임만 100-200 lbs) 하지만 일반적으로 운반을 위해 섹션으로 접거나 분리됩니다. 헤드 및 풋 섹션이 서로 분리됩니다. 모터 메커니즘은 부착 상태를 유지합니다. 킹 조절식 베이스는 2개의 트윈 XL 반으로 분리됩니다 — 각 반이 표준 계단을 통과합니다.
04More like this
Unlock stair simulation, AR visualization, and more.
Open the calculator and check any item against any space.
Open the fit calculator