Will a queen (315x366x36 cm) Fit in a Room?

+0 in clearance

· ON THE WIDTH AXIS

Your queen will not fit in the room — but only just — it is a hair over the limit at the tightest point.

Handling: The item exceeds the space in every orientation — standard entry won't work.

10 ft 4 in vs 10 ft 4 in

Clearance +0 in (+0.0%) on the WIDTH axis

ARoom coverage ratio✓ PASS

\text{coverage} = \dfrac{A_{\text{item}}}{A_{\text{room}}}

↓ SUBSTITUTE

\dfrac{17860}{17860}

Plain English: Share of the room floor consumed by the placed item.

BPer-side walkway clearance✕ FAIL

g_{\min} = \min_i\, g_i

↓ SUBSTITUTE

\min(0, 0, 0, 0)

Plain English: Narrowest walkway gap around a placed item.

CWalkway threshold classification✕ FAIL

\text{tier}(g_{\min})

↓ SUBSTITUTE

\text{tier}(0)

Plain English: Maps the narrowest walkway to a walkway tier (DOESNT_FIT / TIGHT / FITS).

DPlacement score✕ FAIL

\text{score} = \min_i\, c_i / r_i

↓ SUBSTITUTE

\text{score} = 0

Plain English: The worst-axis clearance ratio at the chosen placement — the tightest axis governs which orientation wins.

EMinimum required space · room depth✕ FAIL

d_{\text{req}} = d_{\text{item}} + t

↓ SUBSTITUTE

124 + 24 = 148

Plain English: Smallest space on the limiting axis that would admit this item (with handling tolerance).

FLargest item that fits · room depth✕ FAIL

d_{\max} = d_{\text{space}} - t

↓ SUBSTITUTE

124 - 24 = 100

Plain English: Largest item dimension this space admits on the limiting axis (after handling tolerance).

Orientation	Strategy	Result
0° (as-is), short wall	centered	✕
0° (as-is), short wall	wall_left	✕
0° (as-is), short wall	wall_right	✕
0° (as-is), short wall	floating	✕
0° (as-is), long wall	—	✕
90° rotated, short wall	—	✕
90° rotated, long wall	centered	✕
90° rotated, long wall	wall_left	✕
90° rotated, long wall	wall_right	✕
90° rotated, long wall	floating	✕
diagonal (1°–89°)	—	✕

How the room-fit check works

A room is a 2D footprint — width and depth matter for placement, plus the walkway gap left between the item and walls or other obstacles.

Place the item footprint inside the room rectangle in the orientation it will be used.
Compute walkway gaps from each item edge to every wall and to other obstacles in the room.
Take the minimum walkway gap — that’s the daily-traffic clearance the room must support.
Verdict ladder (getRoomVerdictTier): walkway <18 in DOESN'T_FIT; 18–24 VERY_TIGHT; 24–36 TIGHT; 36–48 FITS; ≥48 confident FITS.

Walkway thresholds use standard ergonomic minimums; a confident mover may negotiate gaps tighter than the recommended tier.

Similar calculations

Run your own fit check

Ask about a different item, door, or route. Free, no signup.